FUTURESCME contracts
Featured Firm VestVest 5% OFF all plans · from $10 · NQ 50x · no swap fee · USDC payouts on-chain 5% Off Code JMU

VERSION HISTORY

Copy Trading Settings

My Funded Perpetuals·9 versions·Read the live article ↗·Rule Radar


CompareA: Version 8againstB: Version 9Pick A and B on any two versions below.
Track a rule
Fetches the article and compares it with Version 9.
▸Version 9November 18, 2026, 2:45 AM+5−0

Changes shown against Version 8.

copied order that was still executing when the group stopped is not filled, and
its rejection says the lead account ended.
+ You can keep up to 20 copy trading groups. Every saved group counts toward
+ that limit, including disabled groups and Copy Trading Stopped records.
+ When you reach it, the settings page shows a notice and **Add Copy Trading
+ Group is unavailable. Select Remove Group** on a stopped record to make
+ room; you can remove one and add a new group in the same save.
Read the Copy Trading Guide for sizing examples,
stage compatibility, and the full lifecycle.

SHA-256 38d399dcc5163fda144a1e07623e179039ba588f33ef43aaf6a44b0a62676d63

▸Version 8November 12, 2026, 4:08 AM+1−1

Changes shown against Version 7.

Copy Trading Settings
+ Source: https://docs.myfundedperpetuals.com/settings/copy-trading
Create and manage same-owner copy-trading groups, select lead and follower accounts, and set balance-adjusted multipliers.
Open Copy Trading settings
Unix-millisecond timestamp as the request's stopped_at. An outdated timestamp
or unfinished cleanup is a no-op.
− This documentation is built and hosted on Mintlify, a developer documentation platform.

SHA-256 294376c9acdd70ccab5abdce59da4c84f23d9860291e83cc67a146463fedad3a

▸Version 7November 11, 2026, 5:57 PM+1−1

Changes shown against Version 6.

Copy Trading Settings
− Source: https://docs.myfundedperpetuals.com/settings/copy-trading
Create and manage same-owner copy-trading groups, select lead and follower accounts, and set balance-adjusted multipliers.
Open Copy Trading settings
Unix-millisecond timestamp as the request's stopped_at. An outdated timestamp
or unfinished cleanup is a no-op.
+ This documentation is built and hosted on Mintlify, a developer documentation platform.

SHA-256 4a5ba2f7709177a2d4e4fc24d33c866393a1b4dd6d74beac8db9cb6fd55824b0

▸Version 6October 31, 2026, 4:21 AM+3−3

Changes shown against Version 5.

scheduled execution boundaries.
Disable and remove
− Disable the group before removing it or selecting another lead. During stop
− cleanup, follower orders are canceled and positions are closed. The affected
− followers remain locked against manual trading until cleanup finishes.
+ Disable the group before removing it or selecting another lead. Disabling
+ cancels copied follower orders; follower positions stay open and every
+ follower unlocks for manual trading right away.
If the lead passes, fails, or is closed, the group stops automatically. The
stopped record identifies why and can be removed after cleanup completes. A

SHA-256 294376c9acdd70ccab5abdce59da4c84f23d9860291e83cc67a146463fedad3a

▸Version 5October 30, 2026, 4:50 PM+6−0

Changes shown against Version 4.

under any name you gave them on the dashboard; renaming an account does not
change its group or multiplier.
+ If saving reports that an account can only be in one enabled group, review
+ its current group first. Remove the account from that group and save before
+ selecting it in another group. If a group has an unavailable lead or follower,
+ its remaining active accounts stay reserved. Use that group's Disable Group
+ control before reusing them. Disabling does not close positions; review the
+ order-cancellation consequences below before changing membership.
Lead Account
Choose the account that should drive the group. Competition accounts cannot

SHA-256 f96e4437d99153b8c2a039732c8e55d019133a9a9abb5a6da6778dcc02f49d1f

▸Version 4October 21, 2026, 4:45 PM+17−0

Changes shown against Version 3.

stay open, and the save confirmation reports how many orders were canceled.
Protect follower positions from the lead account.
+ Edit an enabled group
+ You can add or remove followers and change multipliers while a group stays
+ enabled. New lead orders copy to the saved followers. Orders already working
+ on a follower depend on what changed for that follower:
+
ChangeCopied orders on that follower
Kept in the group with the same multiplierKept, including copied stop loss and take profit orders. They still execute on that follower, and an order already executing completes normally.
Removed from the groupCanceled. The account unlocks for manual trading. Its positions stay open, so add your own stop loss and take profit.
Given a new multiplierCanceled. The account stays locked and its positions stay open without those exits until the lead places new ones, which copy at the new multiplier.
Group turned off (every follower removed)Canceled on every follower. Positions stay open and every follower unlocks for manual trading.
+ Before you save, the form warns when the save would cancel copied orders and
+ shows how many followers are affected. After saving, the confirmation reports
+ how many follower orders were canceled.
+ [!WARNING]
+ To keep a follower with an open position protected, leave its multiplier
+ unchanged until the position is closed. If you do change it, cancel and place
+ the lead's stop loss and take profit again after saving so they copy to that
+ follower at the new multiplier.
API credentials must cover the lead and every follower in the same live or
sandbox environment. If a group includes an account outside that boundary,

SHA-256 4c23341faef09c9ad8ad4af0686496dd0e3a2cae3969b93423e63ca9e60feee9

▸Version 3October 19, 2026, 4:45 PM+20−3

Changes shown against Version 2.

change its group or multiplier.
Lead Account
− Choose the account that should drive the group. Changing the lead of an existing
+ Choose the account that should drive the group. Competition accounts cannot
+ lead a group. Changing the lead of an existing
group requires disabling that group first. If the lead is no longer active or
available, disable the group before editing its membership.
Follower Accounts and Multipliers
Add active accounts you own. A funded account cannot follow an evaluation lead.
+ Competition accounts cannot follow either, because the Competition Rules
+ prohibit copying trades into or out of a competition account. Accounts that
+ cannot be selected show the reason under their name.
The multiplier adjusts the follower's balance-normalized opening quantity:
- below 1× uses less relative size;
- 1× uses the same relative size after starting-balance normalization;
- above 1× uses more relative size, subject to the follower's own limits.
+ Each follower row shows what it would open when the lead opens 1 BTC, and how
+ that quantity follows from the two account sizes and the multiplier. For
+ example, a \$100,000 follower of a \$50,000 lead copies 200% of the lead's
+ quantity at 1×, and 300% at 1.5×.
+ Try An Order
+ Once a group has followers, Try An Order shows how one lead order would
+ scale across the group. Nothing is placed. Drag the slider to set the lead
+ order size and choose 1× or 2× leverage. For each account, the preview
+ shows the order it would open, the margin that order needs, and a bar for the
+ account's balance. The filled part of the bar is the margin needed. An account
+ marked Would Reject cannot afford that order and would skip it while the
+ lead and other followers still fill. Lower its multiplier or use a smaller
+ order to copy it.
Copied market orders wait for the lead market order to fill. If the lead
rejects or expires without filling, its pending market copies are canceled
Disable copying, including a group with inactive or archived accountsPOST /v1/copy-trading/{config_id}/disable
Acknowledge a completed follower stop noticePOST /v1/accounts/{account_id}/acknowledge-copy-stop
− Saving applies the same ownership, account status, stage, sizing, disjoint-group,
− and cleanup rules as the website. Every existing and new member must be
+ Saving applies the same ownership, account status, stage, competition, sizing,
+ disjoint-group, and cleanup rules as the website. Every existing and new member must be
accessible to the credential. Groups omitted from a save are preserved; only
IDs in deleted_config_ids are deleted. A group must be disabled before it

SHA-256 56815ebe45acf1de001d9eb13e58607291cfd6ee33e9a34931bb33e73f8f5d23

▸Version 2October 13, 2026, 4:45 PM+10−1

Changes shown against Version 1.

Every follower keeps independent collateral, challenge-rule, position, and
market checks. One follower can reject an instruction without blocking the lead.
+ Copies use the lead's chosen venue. A trading halt prevents new follower
+ exposure, including an order placed before the halt that is still executing.
+ When you save a group, every account that starts following has its open orders
+ canceled, including stop loss and take profit orders, and its TWAP/VWAP schedules stop. A follower trades only
+ through its lead, so a manual order left on it could not execute. Positions
+ stay open, and the save confirmation reports how many orders were canceled.
+ Protect follower positions from the lead account.
API credentials must cover the lead and every follower in the same live or
sandbox environment. If a group includes an account outside that boundary,
followers remain locked against manual trading until cleanup finishes.
If the lead passes, fails, or is closed, the group stops automatically. The
− stopped record identifies why and can be removed after cleanup completes.
+ stopped record identifies why and can be removed after cleanup completes. A
+ copied order that was still executing when the group stopped is not filled, and
+ its rejection says the lead account ended.
Read the Copy Trading Guide for sizing examples,
stage compatibility, and the full lifecycle.

SHA-256 1b23973c4133158566a12d0d2f16e42437b2ac5794a707012a6236e7c5828fda

▸Version 1October 11, 2026, 2:36 PM

First archived version.

Copy Trading Settings
Source: https://docs.myfundedperpetuals.com/settings/copy-trading
Create and manage same-owner copy-trading groups, select lead and follower accounts, and set balance-adjusted multipliers.
Open Copy Trading settings
Group controls
Each group contains:
- one Lead Account that sends eligible trading instructions;
- one or more Follower Accounts;
- a multiplier from 0.1× to 2× for each follower;
- an enabled, stopping, or stopped lifecycle.
An account can participate in only one enabled group. Groups remain the same
when you switch the active account elsewhere in the app. Accounts are listed
under any name you gave them on the dashboard; renaming an account does not
change its group or multiplier.
Lead Account
Choose the account that should drive the group. Changing the lead of an existing
group requires disabling that group first. If the lead is no longer active or
available, disable the group before editing its membership.
Follower Accounts and Multipliers
Add active accounts you own. A funded account cannot follow an evaluation lead.
The multiplier adjusts the follower's balance-normalized opening quantity:
- below 1× uses less relative size;
- 1× uses the same relative size after starting-balance normalization;
- above 1× uses more relative size, subject to the follower's own limits.
Copied market orders wait for the lead market order to fill. If the lead
rejects or expires without filling, its pending market copies are canceled
without opening follower positions or charging trading fees.
Resting limit and trigger orders, including TP/SL exits, continue to execute
independently on each account. Their fills can occur in a different order.
Every follower keeps independent collateral, challenge-rule, position, and
market checks. One follower can reject an instruction without blocking the lead.
API credentials must cover the lead and every follower in the same live or
sandbox environment. If a group includes an account outside that boundary,
the API rejects the native lead operation before copying any orders. Use a
credential covering the complete group or manage the instruction on the
website. See Authentication for copied-order changes and
scheduled execution boundaries.
Disable and remove
Disable the group before removing it or selecting another lead. During stop
cleanup, follower orders are canceled and positions are closed. The affected
followers remain locked against manual trading until cleanup finishes.
If the lead passes, fails, or is closed, the group stops automatically. The
stopped record identifies why and can be removed after cleanup completes.
Read the Copy Trading Guide for sizing examples,
stage compatibility, and the full lifecycle.
Manage copy groups through the API
API keys with read scope can inspect GET /v1/copy-trading. A group is
returned only when the credential can access its lead and every follower in
the same live or sandbox environment. A restricted key can therefore see
fewer groups than the website. Accessible groups with archived members remain
listed so they can be disabled or deleted.
Keys with trade scope can use these operations:
OperationEndpoint
Create or update groups and explicitly delete disabled groupsPOST /v1/copy-trading
Disable copying, including a group with inactive or archived accountsPOST /v1/copy-trading/{config_id}/disable
Acknowledge a completed follower stop noticePOST /v1/accounts/{account_id}/acknowledge-copy-stop
Saving applies the same ownership, account status, stage, sizing, disjoint-group,
and cleanup rules as the website. Every existing and new member must be
accessible to the credential. Groups omitted from a save are preserved; only
IDs in deleted_config_ids are deleted. A group must be disabled before it
can be deleted or its lead changed. Pending stop cleanup must finish first.
json theme={null}
{
"groups": [
{
"enabled": true,
"source_account_id": "YOUR_LEAD_ACCOUNT_ID",
"targets": [
{ "account_id": "YOUR_FOLLOWER_ACCOUNT_ID", "multiplier_bps": 10000 }
]
}
],
"deleted_config_ids": []
}
Include config_id when updating an existing group. The save response returns
config_ids in submitted-group order, including newly created IDs. A
multiplier of 10000 uses proportional sizing after the follower-to-lead
starting balance ratio. There can be at most 20 groups and 20 followers per
group; multipliers range from 1000 to 20000 basis points.
Creating a group is not idempotent. If the response is lost, list the groups
and reconcile the intended configuration before retrying. Disabling stops new
copying and schedules outstanding copied-order cleanup; it does not close
existing filled positions. Automatic stops caused by a terminal lead follow
the normal follower close-out process.
Before acknowledging a stop, read
GET /v1/accounts/{account_id}/trading-policy. Its account-backed copy_stop
contains stopped_at, completed_at, acknowledged_at, and reason, even
when the original group has been deleted or is hidden from this credential.
When completed_at is present, acknowledge with the exact copy_stop.stopped_at
Unix-millisecond timestamp as the request's stopped_at. An outdated timestamp
or unfinished cleanup is a no-op.

SHA-256 354d622804824d2bf7b5192f71f3c9b879d4d6d5a997c2cc3dc88849cb510d9d

Scroll to Top