RULE CHANGE
Cross Margin & Leverage
Funded Accounts leverage increased from 75x to 100x across FX pairs and general policy.
What this means
Funded Accounts maximum leverage changed from 75x to 100x across all seven FX pairs (AUD-USD-PERP, CAD-USD-PERP, CHF-USD-PERP, EUR-USD-PERP, GBP-USD-PERP, JPY-USD-PERP, NZD-USD-PERP) and in the general policy statement. Primary Accounts leverage remained at 100x. Equity and Index leverage limits remained unchanged.
| What changed | Before Nov 4, 2026 | After Nov 16, 2026 | |
|---|---|---|---|
| Funded Accounts — up to | 75x | → | 100x |
| FX · 10x | 75x | → | 100x |
| FX · 10x | 75x | → | 100x |
| FX · 10x | 75x | → | 100x |
| FX · 10x | 75x | → | 100x |
| FX · 10x | 75x | → | 100x |
▸ View exact changes
The change in place, line by line
Before Nov 4, 2026
| 1 E-mini S\&P 500 (ES) | ES | 50 units | 50 USDC |
|---|---|---|---|
| 1 Micro E-mini Nasdaq-100 (MNQ) | NQ | 2 units | 2 USDC |
| 1 E-mini Nasdaq-100 (NQ) | NQ | 20 units | 20 USDC |
For either index, 1 E-mini has the price exposure of 10 Micro E-minis. For example, 3 MES correspond to 15 ES units on Vest, and 3 MNQ correspond to 6 NQ units. These are gross price-exposure equivalents before fees and funding; Vest perpetuals have their own pricing, margin requirements, and trading rules. CME multipliers: Micro E-mini contract specifications.
Entering the equivalent size
Choose ES or NQ, then switch the Amount field from USDC to the market unit and enter the Vest quantity from the table. When Amount is set to USDC, it represents position notional, not the margin you are posting. Notional = quantity × price; estimated initial margin = notional ÷ leverage. Check the order preview for the resulting size, margin, fees, and estimated Fail Price where applicable.
Example: the exposure of 1 MES
At a hypothetical ES price of 6,000, enter 5 ES units for the price exposure of 1 MES. The position notional is 5 × 6,000 = 30,000 USDC. At 10x leverage, estimated initial margin is 3,000 USDC before fees. A 10-point rise produces 50 USDC of gross profit on a long position; a 10-point fall produces a 50 USDC loss. A short position has the opposite result.
Changing leverage changes the margin required for these 5 units, not their 5 USDC-per-point exposure. To estimate price risk, multiply quantity by the distance to your stop: 5 units × 20 points = 100 USDC before fees, funding, and slippage. A stop does not guarantee its execution price, and account loss limits apply to total equity across all open positions.
Leverage
Leverage is set per market and displayed on that market's trading page.
- Primary Accounts — up to 100x, market-dependent
− - Funded Accounts — up to 75x, market-dependent
Markets with lower liquidity or higher volatility typically cap leverage lower than highly liquid markets like BTC or major equity indices.
Maximum Leverage by Market
Primary (direct) and Funded Account maximum leverage is listed below. “Unavailable” means the market cannot be traded on Funded Accounts.
| Asset class | Market | Primary max. | Funded max. |
|---|---|---|---|
| CRYPTO | BTC-PERP | 50x | 25x |
| CRYPTO | ETH-PERP | 50x | 15x |
| CRYPTO | HYPE-PERP | 5x | 5x |
| CRYPTO | SOL-PERP | 20x | 10x |
| CRYPTO | XRP-PERP | 10x | Unavailable |
| ENERGY | BZ-PERP | 10x | 5x |
| ENERGY | CL-PERP | 10x | 10x |
| ENERGY | NG-PERP | 10x | 5x |
| EQUITY | NVDA-USD-PERP | 25x | 25x |
|---|---|---|---|
| EQUITY | ORCL-USD-PERP | 25x | 5x |
| EQUITY | PLTR-USD-PERP | 25x | 5x |
| EQUITY | QQQ-USD-PERP | 50x | 5x |
| EQUITY | SKHY-USD-PERP | 10x | 5x |
| EQUITY | SLV-USD-PERP | 25x | 5x |
| EQUITY | SMH-USD-PERP | 25x | 5x |
| EQUITY | SNDK-USD-PERP | 10x | 10x |
| EQUITY | SPCX-USD-PERP | 10x | 10x |
| EQUITY | SPY-USD-PERP | 50x | 5x |
| EQUITY | TSLA-USD-PERP | 25x | 10x |
| EQUITY | TSM-USD-PERP | 25x | 5x |
−
| EQUITY | NVDA-USD-PERP | 25x | 25x |
|---|---|---|---|
| FX | AUD-USD-PERP | 100x | 75x |
| FX | CAD-USD-PERP | 100x | 75x |
| FX | CHF-USD-PERP | 100x | 75x |
| FX | EUR-USD-PERP | 100x | 75x |
| FX | GBP-USD-PERP | 100x | 75x |
| FX | JPY-USD-PERP | 100x | 75x |
| FX | NZD-USD-PERP | 100x | 75x |
| INDEX | NQ-PERP | 50x | 50x |
| INDEX | RTY-PERP | 50x | 50x |
| INDEX | ES-PERP | 75x | 75x |
| INDEX | YM-PERP | 50x | 50x |
| METAL | GC-PERP | 25x | 25x |
| METAL | HG-PERP | 25x | 5x |
| METAL | PL-PERP | 25x | 5x |
| METAL | SI-PERP | 25x | 15x |
Changing your leverage
Leverage is set per market from the trading view.
1. Open the market you want to trade.
2. Click the leverage indicator near the top of the order form (shows your current multiplier, e.g. "5x").
After Nov 16, 2026
| 1 E-mini S\&P 500 (ES) | ES | 50 units | 50 USDC |
|---|---|---|---|
| 1 Micro E-mini Nasdaq-100 (MNQ) | NQ | 2 units | 2 USDC |
| 1 E-mini Nasdaq-100 (NQ) | NQ | 20 units | 20 USDC |
For either index, 1 E-mini has the price exposure of 10 Micro E-minis. For example, 3 MES correspond to 15 ES units on Vest, and 3 MNQ correspond to 6 NQ units. These are gross price-exposure equivalents before fees and funding; Vest perpetuals have their own pricing, margin requirements, and trading rules. CME multipliers: Micro E-mini contract specifications.
Entering the equivalent size
Choose ES or NQ, then switch the Amount field from USDC to the market unit and enter the Vest quantity from the table. When Amount is set to USDC, it represents position notional, not the margin you are posting. Notional = quantity × price; estimated initial margin = notional ÷ leverage. Check the order preview for the resulting size, margin, fees, and estimated Fail Price where applicable.
Example: the exposure of 1 MES
At a hypothetical ES price of 6,000, enter 5 ES units for the price exposure of 1 MES. The position notional is 5 × 6,000 = 30,000 USDC. At 10x leverage, estimated initial margin is 3,000 USDC before fees. A 10-point rise produces 50 USDC of gross profit on a long position; a 10-point fall produces a 50 USDC loss. A short position has the opposite result.
Changing leverage changes the margin required for these 5 units, not their 5 USDC-per-point exposure. To estimate price risk, multiply quantity by the distance to your stop: 5 units × 20 points = 100 USDC before fees, funding, and slippage. A stop does not guarantee its execution price, and account loss limits apply to total equity across all open positions.
Leverage
Leverage is set per market and displayed on that market's trading page.
- Primary Accounts — up to 100x, market-dependent
+ - Funded Accounts — up to 100x, market-dependent
Markets with lower liquidity or higher volatility typically cap leverage lower than highly liquid markets like BTC or major equity indices.
Maximum Leverage by Market
Primary (direct) and Funded Account maximum leverage is listed below. “Unavailable” means the market cannot be traded on Funded Accounts.
| Asset class | Market | Primary max. | Funded max. |
|---|---|---|---|
| CRYPTO | BTC-PERP | 50x | 25x |
| CRYPTO | ETH-PERP | 50x | 15x |
| CRYPTO | HYPE-PERP | 5x | 5x |
| CRYPTO | SOL-PERP | 20x | 10x |
| CRYPTO | XRP-PERP | 10x | Unavailable |
| ENERGY | BZ-PERP | 10x | 5x |
| ENERGY | CL-PERP | 10x | 10x |
| ENERGY | NG-PERP | 10x | 5x |
| EQUITY | NVDA-USD-PERP | 25x | 25x |
|---|---|---|---|
| EQUITY | ORCL-USD-PERP | 25x | 5x |
| EQUITY | PLTR-USD-PERP | 25x | 5x |
| EQUITY | QQQ-USD-PERP | 50x | 5x |
| EQUITY | SKHY-USD-PERP | 10x | 5x |
| EQUITY | SLV-USD-PERP | 25x | 5x |
| EQUITY | SMH-USD-PERP | 25x | 5x |
| EQUITY | SNDK-USD-PERP | 10x | 10x |
| EQUITY | SPCX-USD-PERP | 10x | 10x |
| EQUITY | SPY-USD-PERP | 50x | 5x |
| EQUITY | TSLA-USD-PERP | 25x | 10x |
| EQUITY | TSM-USD-PERP | 25x | 5x |
+
| EQUITY | NVDA-USD-PERP | 25x | 25x |
|---|---|---|---|
| FX | AUD-USD-PERP | 100x | 100x |
| FX | CAD-USD-PERP | 100x | 100x |
| FX | CHF-USD-PERP | 100x | 100x |
| FX | EUR-USD-PERP | 100x | 100x |
| FX | GBP-USD-PERP | 100x | 100x |
| FX | JPY-USD-PERP | 100x | 100x |
| FX | NZD-USD-PERP | 100x | 100x |
| INDEX | NQ-PERP | 50x | 50x |
| INDEX | RTY-PERP | 50x | 50x |
| INDEX | ES-PERP | 75x | 75x |
| INDEX | YM-PERP | 50x | 50x |
| METAL | GC-PERP | 25x | 25x |
| METAL | HG-PERP | 25x | 5x |
| METAL | PL-PERP | 25x | 5x |
| METAL | SI-PERP | 25x | 15x |
Changing your leverage
Leverage is set per market from the trading view.
1. Open the market you want to trade.
2. Click the leverage indicator near the top of the order form (shows your current multiplier, e.g. "5x").
| 1 E-mini S\&P 500 (ES) | ES | 50 units | 50 USDC |
|---|---|---|---|
| 1 Micro E-mini Nasdaq-100 (MNQ) | NQ | 2 units | 2 USDC |
| 1 E-mini Nasdaq-100 (NQ) | NQ | 20 units | 20 USDC |
For either index, 1 E-mini has the price exposure of 10 Micro E-minis. For example, 3 MES correspond to 15 ES units on Vest, and 3 MNQ correspond to 6 NQ units. These are gross price-exposure equivalents before fees and funding; Vest perpetuals have their own pricing, margin requirements, and trading rules. CME multipliers: Micro E-mini contract specifications.
Entering the equivalent size
Choose ES or NQ, then switch the Amount field from USDC to the market unit and enter the Vest quantity from the table. When Amount is set to USDC, it represents position notional, not the margin you are posting. Notional = quantity × price; estimated initial margin = notional ÷ leverage. Check the order preview for the resulting size, margin, fees, and estimated Fail Price where applicable.
Example: the exposure of 1 MES
At a hypothetical ES price of 6,000, enter 5 ES units for the price exposure of 1 MES. The position notional is 5 × 6,000 = 30,000 USDC. At 10x leverage, estimated initial margin is 3,000 USDC before fees. A 10-point rise produces 50 USDC of gross profit on a long position; a 10-point fall produces a 50 USDC loss. A short position has the opposite result.
Changing leverage changes the margin required for these 5 units, not their 5 USDC-per-point exposure. To estimate price risk, multiply quantity by the distance to your stop: 5 units × 20 points = 100 USDC before fees, funding, and slippage. A stop does not guarantee its execution price, and account loss limits apply to total equity across all open positions.
Leverage
Leverage is set per market and displayed on that market's trading page.
- Primary Accounts — up to 100x, market-dependent
− - Funded Accounts — up to 75x, market-dependent
+ - Funded Accounts — up to 100x, market-dependent
Markets with lower liquidity or higher volatility typically cap leverage lower than highly liquid markets like BTC or major equity indices.
Maximum Leverage by Market
Primary (direct) and Funded Account maximum leverage is listed below. “Unavailable” means the market cannot be traded on Funded Accounts.
| Asset class | Market | Primary max. | Funded max. |
|---|---|---|---|
| CRYPTO | BTC-PERP | 50x | 25x |
| CRYPTO | ETH-PERP | 50x | 15x |
| CRYPTO | HYPE-PERP | 5x | 5x |
| CRYPTO | SOL-PERP | 20x | 10x |
| CRYPTO | XRP-PERP | 10x | Unavailable |
| ENERGY | BZ-PERP | 10x | 5x |
| ENERGY | CL-PERP | 10x | 10x |
| ENERGY | NG-PERP | 10x | 5x |
| EQUITY | NVDA-USD-PERP | 25x | 25x |
|---|---|---|---|
| EQUITY | ORCL-USD-PERP | 25x | 5x |
| EQUITY | PLTR-USD-PERP | 25x | 5x |
| EQUITY | QQQ-USD-PERP | 50x | 5x |
| EQUITY | SKHY-USD-PERP | 10x | 5x |
| EQUITY | SLV-USD-PERP | 25x | 5x |
| EQUITY | SMH-USD-PERP | 25x | 5x |
| EQUITY | SNDK-USD-PERP | 10x | 10x |
| EQUITY | SPCX-USD-PERP | 10x | 10x |
| EQUITY | SPY-USD-PERP | 50x | 5x |
| EQUITY | TSLA-USD-PERP | 25x | 10x |
| EQUITY | TSM-USD-PERP | 25x | 5x |
−
| EQUITY | NVDA-USD-PERP | 25x | 25x |
|---|---|---|---|
| FX | AUD-USD-PERP | 100x | 75x |
| FX | CAD-USD-PERP | 100x | 75x |
| FX | CHF-USD-PERP | 100x | 75x |
| FX | EUR-USD-PERP | 100x | 75x |
| FX | GBP-USD-PERP | 100x | 75x |
| FX | JPY-USD-PERP | 100x | 75x |
| FX | NZD-USD-PERP | 100x | 75x |
+
| EQUITY | NVDA-USD-PERP | 25x | 25x |
|---|---|---|---|
| FX | AUD-USD-PERP | 100x | 100x |
| FX | CAD-USD-PERP | 100x | 100x |
| FX | CHF-USD-PERP | 100x | 100x |
| FX | EUR-USD-PERP | 100x | 100x |
| FX | GBP-USD-PERP | 100x | 100x |
| FX | JPY-USD-PERP | 100x | 100x |
| FX | NZD-USD-PERP | 100x | 100x |
| INDEX | NQ-PERP | 50x | 50x |
| INDEX | RTY-PERP | 50x | 50x |
| INDEX | ES-PERP | 75x | 75x |
| INDEX | YM-PERP | 50x | 50x |
| METAL | GC-PERP | 25x | 25x |
| METAL | HG-PERP | 25x | 5x |
| METAL | PL-PERP | 25x | 5x |
| METAL | SI-PERP | 25x | 15x |
Changing your leverage
Leverage is set per market from the trading view.
1. Open the market you want to trade.
2. Click the leverage indicator near the top of the order form (shows your current multiplier, e.g. "5x").