RULE CHANGE
Trading Guide
NAS100 moved from Hyperliquid default to Composite default; SP500 and NAS100 on Ostium references updated; trigger pricing clarified for three venues.
What this means
NAS100 default venue changed from Hyperliquid to Composite (MyFundedPerps' consolidated 24/7 order book built from Hyperliquid, Binance, and Bybit), with option to switch to Hyperliquid in Venue picker. NAS100 on Ostium was removed from several sections covering Order Book display, spread reminders, and trigger pricing. Trigger pricing description expanded from Veranta and Ostium to also include Composite, with mid price clarified as mark price. SP500 remains on Hyperliquid by default and can trade on Ostium with standard market hours.
| What changed | Before Nov 20, 2026 | After Nov 21, 2026 | |
|---|---|---|---|
| Forex on Veranta, and | NAS100, SP500 | → | SP500 |
| \$50,000 | NAS100 | → | SP500 |
| Value | NAS100, SP500 | → | SP500 |
| Value | SP500 and NAS100 | → | SP500 |
▸ View exact changes
The change in place, line by line
Before Nov 20, 2026
last used. It also keeps your Hide Inactive choice in Accounts and the
columns you pick under Columns in each table. These choices are saved to
your account, so they follow you to other devices. A link that names a specific
tab still opens that tab.
A dash means today's baseline is unavailable. Accounts with no open positions
and no activity since the daily reset show zero.
On a desktop, Daily Loss Remaining and Max Drawdown Remaining show how
much of each account's loss limits is left, and Breach At shows the price on
the market you are viewing at which an account holding it would reach its
nearest loss limit. See
Loss limits in the Accounts tab.
Forex and index markets
− Gold (XAU) trades on Binance, and the S\&P 500 (SP500) and Nasdaq-100 (NAS100)
− on Hyperliquid, around the clock. SP500 and NAS100 open on Hyperliquid by
− default. Where offered, they can also trade on Ostium with standard market
− hours; see
Markets with two trading-hour options.
The following markets price from oracle
venues that quote one bid and one ask with no depth behind them:
| Markets | Venue |
|---|
| EUR/USD, USD/JPY, GBP/USD, AUD/USD, USD/CAD, and USD/CHF | Veranta |
| Dow Jones 30 (US30) | Ostium |
− On these markets, and on SP500 and NAS100 on Ostium, the Order Book tab shows
the two prices instead of a ladder.
Buy / Long fills at the ask and Sell / Short fills at the bid, plus a
slippage charge that grows with order size; see
Veranta and Ostium fills. The tab also shows the
spread between them, the spread cost of the order in your order ticket, and the spread cost per \$100K of order value. The
spread cost is what you give up by opening at one price and closing at the
other; trading fees are charged separately. Select Buy / Long or Sell / Short to
set that side on your order ticket. On a phone, this opens the order ticket.
US30 spreads can be high, so the order ticket shows a reminder under the
Buy / Long and Sell / Short button to check the estimated price before
− you trade. On SP500 and NAS100 on Ostium, the ticket shows the current spread
there whenever it is above 0.01%, with Switch to 24/7 to trade the market on
Hyperliquid instead.
US30 prices are index points. One unit of size is worth \$1 per
point, the same as every other market on the platform. Take Profit, Stop Loss,
− and other price triggers on these markets follow the venue's mid price. Check
− the order ticket for each market's current leverage and size requirements.
Trading hours
These markets follow their venue's trading sessions instead of trading around
the clock. Times are New York time:
| Markets | Weekly session | Daily break |
|---|---|---|
| EUR/USD, USD/JPY, GBP/USD, AUD/USD, USD/CAD, USD/CHF | Sunday 17:15 to Friday 17:00 | 17:00 to 17:15, Monday to Thursday |
−
| Markets | Weekly session | Daily break |
|---|---|---|
| US30, and SP500 and NAS100 on Ostium where offered | Sunday 18:00 to Friday 17:00 | 17:00 to 18:00, Monday to Thursday |
The forex daily break is the market's daily rollover. In the weeks when the
United States and Europe change their clocks on different dates, it moves to
18:00 to 18:15 New York time. Venues also close early or for the full day on
some holidays. The trade page shows a Market Closed notice whenever a market
is outside its session.
Open positions stay open through a daily break; see
While a market is closed for what you can do
during one.
A badge beside the market name marks these markets in the trade page header,
the market picker, search, and the Markets page, so you can tell they do not
trade around the clock before you open one. FX pairs show 24/5, since they
trade from Sunday to Friday with only a 15-minute daily rollover. Markets with
Loss and Take Profit are edited under One-Click Trading by Market in
Trading settings. Markets without their own settings start from your Quick Size
amount and your TP/SL preset.
[!WARNING]
One-Click orders are sent immediately. Fills can differ from the price shown
when the market moves fast. Challenge rules, exposure limits, and order
validation still apply.
Choose an order type
| Order | What it does | Main tradeoff |
|---|---|---|
| Market | Fills the full size using the execution model described below. | Adverse slippage is capped by the market's published tier. |
| Limit | Rests at your price and fills in full there once the market reaches it. A limit placed through the market fills right away as a market order. | Controls price but may remain unfilled if the market never reaches the limit. |
| Stop / Take Profit | Watches a trigger and submits the configured exit behavior when reached. | A trigger is not a guaranteed fill price; execution still uses current market conditions. |
−
| Order | What it does | Main tradeoff |
|---|---|---|
| Triggers on Veranta and Ostium markets | Take Profit, Stop Loss, and other price triggers follow the venue's mid price. | The fill still uses the bid or ask, so it can differ from the mid price that triggered it. |
| Scheduled or advanced order | Breaks or manages an instruction using the controls shown in the order ticket. | Each generated order still passes the ordinary account and execution checks. |
Check the order ticket for the order types available on the selected market.
Select Reduce Only to cap an order at closing or shrinking an existing
position in the opposite direction. It is offered on every order type except
Take Market: a reduce-only take exit belongs on the position's Take Profit
instead. When an account restriction requires it, the option is locked on and
oversized requests are capped at the open position size.
If the selected account has an open position in the market, checking **Reduce
Only switches the ticket to the closing side: Sell / Short** for a long, or
Buy / Long for a short. The size control then sizes against that position.
Checking it with no position, or unchecking it, leaves the side unchanged. You
can still switch the side yourself afterwards.
| Open interest | Up to \$100,000 | Up to \$500,000 | Above \$500,000 |
|---|---|---|---|
| Above \$500M | 1.6 bps | 2.4 bps | 4.0 bps |
| \$100M to \$500M | 2.4 bps | 3.6 bps | 6.0 bps |
| \$25M to \$100M | 4.0 bps | 6.0 bps | 10.0 bps |
| \$10M to \$25M | 7.0 bps | 12.0 bps | 18.0 bps |
| Below \$10M | 12.0 bps | 20.0 bps | 32.0 bps |
When an instrument's open interest cannot be observed, the most conservative
band sets the cap; book prices inside the cap are still preserved. Resting
limit orders fill at exactly the limit price once both the opposing top of
book and the mark reference reach it. A limit placed through the market fills as a market order under this same
schedule, never worse than its limit.
Veranta and Ostium fills
− Forex on Veranta, and NAS100, SP500, and US30 on Ostium, fill at the venue's
ask for buys or bid for sells, moved against you by a slippage charge. There is
no cap from the mark, and a fill is never better than the mark. For buys, the
fill is ask × (1 + charge / 10,000); for sells, it is bid × (1 - charge /
10,000).
The charge depends on order notional at the mark. It rises in a straight line
between the amounts below and stays flat above \$2,000,000. For example, a
− \$50,000 NAS100 order pays 0.075 bps, and a \$150,000 EUR/USD order pays
0.065 bps.
− NAS100, SP500, and US30 on Ostium
| Order notional | Slippage charge |
|---|---|
| \$0 | 0 bps |
| \$100,000 | 0.15 bps |
| \$1,000,000 | 0.30 bps |
| \$2,000,000 | 0.60 bps |
Forex on Veranta
| Order notional | Slippage charge |
|---|---|
| \$0 | 0 bps |
| \$100,000 | 0.05 bps |
| \$200,000 | 0.08 bps |
| \$1,000,000 | 0.12 bps |
| \$2,000,000 | 0.15 bps |
while it waits to fill. Releasing one sets that order's waiting TP/SL, just
like editing it from Open Orders.
Each draft TP and SL line shows the estimated profit or loss in USD
next to its price, after estimated fees, once the order has a size. For a
market order the estimate follows the live price until you submit.
A dragged Take Profit or Stop Loss is kept on the correct side of the entry it
will protect: the trigger price of a Stop Market or Take Market order, or the
limit price of a limit, Stop Limit, or Take Limit order.
New Take Profit, Stop Loss, and other conditional orders use the market's
standard chart source:
| Venue | Trigger source |
|---|---|
| Binance, Bybit, Hyperliquid | Last traded price |
−
| Venue | Trigger source |
|---|---|
| Veranta (forex), Ostium | Mark price (venue mid) |
For Last Price triggers, one actual trade touching your level is enough,
including a small trade. The platform does not wait for the candle to close
or for the mark price to reach the same level. Liquidation and account loss
monitoring use their separate price references.
Orders placed before this update keep their original trigger policy. Editing
a trigger price or size does not switch that policy. To use the new policy,
cancel the old conditional order and place a replacement. Attached TP/SL also
keeps the policy of its entry order if that entry fills after the update.
How triggered Stop Loss and Take Profit exits fill
When a Stop Loss or Take Profit market exit triggers, the platform looks up the
first recorded best bid and ask at or after the moment the trigger was touched.
If that touch quote is available and the order and position have not changed
Layout menu, split the chart area into One Chart, Two Charts** side by
side, or Four Charts in a grid. Every chart is a full
chart with your indicators, drawing tools, saved chart layouts, and position
and order lines for the market it shows.
- The first chart always shows the market in the address bar. Picking a
different market in its header opens that market's trade page.
- Each other chart has its own market picker in its header and keeps its own
timeframe, so you can watch different markets, or the same market on
different timeframes. Its Alerts button lists your price alerts and
creates new ones on that chart's market. Changing its market or timeframe
does not retarget the other charts. Markets with
two trading-hour options, such as
− SP500 and NAS100, follow the Trading Hours picker in the market bar on
every chart, so the same market shows the same prices on each. A chart the layout shows for the first time starts on the market in the address
bar, on the 1h, 4h, or daily timeframe.
- Saved chart customizations are shared across charts. Charts showing the same
market on the same venue show the same drawings, even on different
timeframes, and a drawing edited on one appears on the others within a
couple of seconds (see Chart drawings).
- Click a chart to trade its market. The active chart gets a highlighted
border, and the order ticket, order book, and One-Click window switch to its
market. When that market differs from the address bar, the ticket and book
show a "Following chart" strip with the market name, and the buy and sell
buttons name the market, so you can confirm it before you submit. While two
or four charts show, the One-Click window's header names the market its
After Nov 21, 2026
last used. It also keeps your Hide Inactive choice in Accounts and the
columns you pick under Columns in each table. These choices are saved to
your account, so they follow you to other devices. A link that names a specific
tab still opens that tab.
A dash means today's baseline is unavailable. Accounts with no open positions
and no activity since the daily reset show zero.
On a desktop, Daily Loss Remaining and Max Drawdown Remaining show how
much of each account's loss limits is left, and Breach At shows the price on
the market you are viewing at which an account holding it would reach its
nearest loss limit. See
Loss limits in the Accounts tab.
Forex and index markets
+ Gold (XAU) trades on Binance, the S\&P 500 (SP500) trades on Hyperliquid, and
+ the Nasdaq-100 (NAS100) trades on Composite by default, all around the
+ clock. Composite is MyFundedPerps' consolidated 24/7 order book for NAS100,
+ built from Hyperliquid, Binance, and Bybit; you can also switch NAS100 to
+ Hyperliquid in the Venue picker. SP500 opens on Hyperliquid by default and,
+ where offered, can also trade on Ostium with standard market hours; see
Markets with two trading-hour options.
The following markets price from oracle
venues that quote one bid and one ask with no depth behind them:
| Markets | Venue |
|---|
| EUR/USD, USD/JPY, GBP/USD, AUD/USD, USD/CAD, and USD/CHF | Veranta |
| Dow Jones 30 (US30) | Ostium |
+ On these markets, and on SP500 on Ostium, the Order Book tab shows
the two prices instead of a ladder.
Buy / Long fills at the ask and Sell / Short fills at the bid, plus a
slippage charge that grows with order size; see
Veranta and Ostium fills. The tab also shows the
spread between them, the spread cost of the order in your order ticket, and the spread cost per \$100K of order value. The
spread cost is what you give up by opening at one price and closing at the
other; trading fees are charged separately. Select Buy / Long or Sell / Short to
set that side on your order ticket. On a phone, this opens the order ticket.
US30 spreads can be high, so the order ticket shows a reminder under the
Buy / Long and Sell / Short button to check the estimated price before
+ you trade. On SP500 on Ostium, the ticket shows the current spread
there whenever it is above 0.01%, with Switch to 24/7 to trade the market on
Hyperliquid instead.
US30 prices are index points. One unit of size is worth \$1 per
point, the same as every other market on the platform. Take Profit, Stop Loss,
+ and other price triggers on Veranta, Ostium, and Composite follow the market's
+ mark (mid) price. Check the order ticket for each market's current leverage and
+ size requirements.
Trading hours
These markets follow their venue's trading sessions instead of trading around
the clock. Times are New York time:
| Markets | Weekly session | Daily break |
|---|---|---|
| EUR/USD, USD/JPY, GBP/USD, AUD/USD, USD/CAD, USD/CHF | Sunday 17:15 to Friday 17:00 | 17:00 to 17:15, Monday to Thursday |
+
| Markets | Weekly session | Daily break |
|---|---|---|
| US30, and SP500 on Ostium where offered | Sunday 18:00 to Friday 17:00 | 17:00 to 18:00, Monday to Thursday |
The forex daily break is the market's daily rollover. In the weeks when the
United States and Europe change their clocks on different dates, it moves to
18:00 to 18:15 New York time. Venues also close early or for the full day on
some holidays. The trade page shows a Market Closed notice whenever a market
is outside its session.
Open positions stay open through a daily break; see
While a market is closed for what you can do
during one.
A badge beside the market name marks these markets in the trade page header,
the market picker, search, and the Markets page, so you can tell they do not
trade around the clock before you open one. FX pairs show 24/5, since they
trade from Sunday to Friday with only a 15-minute daily rollover. Markets with
Loss and Take Profit are edited under One-Click Trading by Market in
Trading settings. Markets without their own settings start from your Quick Size
amount and your TP/SL preset.
[!WARNING]
One-Click orders are sent immediately. Fills can differ from the price shown
when the market moves fast. Challenge rules, exposure limits, and order
validation still apply.
Choose an order type
| Order | What it does | Main tradeoff |
|---|---|---|
| Market | Fills the full size using the execution model described below. | Adverse slippage is capped by the market's published tier. |
| Limit | Rests at your price and fills in full there once the market reaches it. A limit placed through the market fills right away as a market order. | Controls price but may remain unfilled if the market never reaches the limit. |
| Stop / Take Profit | Watches a trigger and submits the configured exit behavior when reached. | A trigger is not a guaranteed fill price; execution still uses current market conditions. |
+
| Order | What it does | Main tradeoff |
|---|---|---|
| Triggers on Veranta, Ostium, and Composite markets | Take Profit, Stop Loss, and other price triggers follow the market's mid (mark) price. | The fill still uses the bid or ask, so it can differ from the mid price that triggered it. |
| Scheduled or advanced order | Breaks or manages an instruction using the controls shown in the order ticket. | Each generated order still passes the ordinary account and execution checks. |
Check the order ticket for the order types available on the selected market.
Select Reduce Only to cap an order at closing or shrinking an existing
position in the opposite direction. It is offered on every order type except
Take Market: a reduce-only take exit belongs on the position's Take Profit
instead. When an account restriction requires it, the option is locked on and
oversized requests are capped at the open position size.
If the selected account has an open position in the market, checking **Reduce
Only switches the ticket to the closing side: Sell / Short** for a long, or
Buy / Long for a short. The size control then sizes against that position.
Checking it with no position, or unchecking it, leaves the side unchanged. You
can still switch the side yourself afterwards.
| Open interest | Up to \$100,000 | Up to \$500,000 | Above \$500,000 |
|---|---|---|---|
| Above \$500M | 1.6 bps | 2.4 bps | 4.0 bps |
| \$100M to \$500M | 2.4 bps | 3.6 bps | 6.0 bps |
| \$25M to \$100M | 4.0 bps | 6.0 bps | 10.0 bps |
| \$10M to \$25M | 7.0 bps | 12.0 bps | 18.0 bps |
| Below \$10M | 12.0 bps | 20.0 bps | 32.0 bps |
When an instrument's open interest cannot be observed, the most conservative
band sets the cap; book prices inside the cap are still preserved. Resting
limit orders fill at exactly the limit price once both the opposing top of
book and the mark reference reach it. A limit placed through the market fills as a market order under this same
schedule, never worse than its limit.
Veranta and Ostium fills
+ Forex on Veranta, and SP500 and US30 on Ostium, fill at the venue's
ask for buys or bid for sells, moved against you by a slippage charge. There is
no cap from the mark, and a fill is never better than the mark. For buys, the
fill is ask × (1 + charge / 10,000); for sells, it is bid × (1 - charge /
10,000).
The charge depends on order notional at the mark. It rises in a straight line
between the amounts below and stays flat above \$2,000,000. For example, a
+ \$50,000 SP500 order on Ostium pays 0.075 bps, and a \$150,000 EUR/USD order pays
0.065 bps.
+ SP500 and US30 on Ostium
| Order notional | Slippage charge |
|---|---|
| \$0 | 0 bps |
| \$100,000 | 0.15 bps |
| \$1,000,000 | 0.30 bps |
| \$2,000,000 | 0.60 bps |
Forex on Veranta
| Order notional | Slippage charge |
|---|---|
| \$0 | 0 bps |
| \$100,000 | 0.05 bps |
| \$200,000 | 0.08 bps |
| \$1,000,000 | 0.12 bps |
| \$2,000,000 | 0.15 bps |
while it waits to fill. Releasing one sets that order's waiting TP/SL, just
like editing it from Open Orders.
Each draft TP and SL line shows the estimated profit or loss in USD
next to its price, after estimated fees, once the order has a size. For a
market order the estimate follows the live price until you submit.
A dragged Take Profit or Stop Loss is kept on the correct side of the entry it
will protect: the trigger price of a Stop Market or Take Market order, or the
limit price of a limit, Stop Limit, or Take Limit order.
New Take Profit, Stop Loss, and other conditional orders use the market's
standard chart source:
| Venue | Trigger source |
|---|---|
| Binance, Bybit, Hyperliquid | Last traded price |
+
| Venue | Trigger source |
|---|---|
| Veranta (forex), Ostium, Composite | Mark price (venue mid) |
For Last Price triggers, one actual trade touching your level is enough,
including a small trade. The platform does not wait for the candle to close
or for the mark price to reach the same level. Liquidation and account loss
monitoring use their separate price references.
Orders placed before this update keep their original trigger policy. Editing
a trigger price or size does not switch that policy. To use the new policy,
cancel the old conditional order and place a replacement. Attached TP/SL also
keeps the policy of its entry order if that entry fills after the update.
How triggered Stop Loss and Take Profit exits fill
When a Stop Loss or Take Profit market exit triggers, the platform looks up the
first recorded best bid and ask at or after the moment the trigger was touched.
If that touch quote is available and the order and position have not changed
Layout menu, split the chart area into One Chart, Two Charts** side by
side, or Four Charts in a grid. Every chart is a full
chart with your indicators, drawing tools, saved chart layouts, and position
and order lines for the market it shows.
- The first chart always shows the market in the address bar. Picking a
different market in its header opens that market's trade page.
- Each other chart has its own market picker in its header and keeps its own
timeframe, so you can watch different markets, or the same market on
different timeframes. Its Alerts button lists your price alerts and
creates new ones on that chart's market. Changing its market or timeframe
does not retarget the other charts. Markets with
two trading-hour options, such as
+ SP500, follow the Trading Hours picker in the market bar on
every chart, so the same market shows the same prices on each. A chart the layout shows for the first time starts on the market in the address
bar, on the 1h, 4h, or daily timeframe.
- Saved chart customizations are shared across charts. Charts showing the same
market on the same venue show the same drawings, even on different
timeframes, and a drawing edited on one appears on the others within a
couple of seconds (see Chart drawings).
- Click a chart to trade its market. The active chart gets a highlighted
border, and the order ticket, order book, and One-Click window switch to its
market. When that market differs from the address bar, the ticket and book
show a "Following chart" strip with the market name, and the buy and sell
buttons name the market, so you can confirm it before you submit. While two
or four charts show, the One-Click window's header names the market its
last used. It also keeps your Hide Inactive choice in Accounts and the
columns you pick under Columns in each table. These choices are saved to
your account, so they follow you to other devices. A link that names a specific
tab still opens that tab.
A dash means today's baseline is unavailable. Accounts with no open positions
and no activity since the daily reset show zero.
On a desktop, Daily Loss Remaining and Max Drawdown Remaining show how
much of each account's loss limits is left, and Breach At shows the price on
the market you are viewing at which an account holding it would reach its
nearest loss limit. See
Loss limits in the Accounts tab.
Forex and index markets
− Gold (XAU) trades on Binance, and the S\&P 500 (SP500) and Nasdaq-100 (NAS100)
− on Hyperliquid, around the clock. SP500 and NAS100 open on Hyperliquid by
− default. Where offered, they can also trade on Ostium with standard market
− hours; see
+ Gold (XAU) trades on Binance, the S\&P 500 (SP500) trades on Hyperliquid, and
+ the Nasdaq-100 (NAS100) trades on Composite by default, all around the
+ clock. Composite is MyFundedPerps' consolidated 24/7 order book for NAS100,
+ built from Hyperliquid, Binance, and Bybit; you can also switch NAS100 to
+ Hyperliquid in the Venue picker. SP500 opens on Hyperliquid by default and,
+ where offered, can also trade on Ostium with standard market hours; see
Markets with two trading-hour options.
The following markets price from oracle
venues that quote one bid and one ask with no depth behind them:
| Markets | Venue |
|---|
| EUR/USD, USD/JPY, GBP/USD, AUD/USD, USD/CAD, and USD/CHF | Veranta |
| Dow Jones 30 (US30) | Ostium |
− On these markets, and on SP500 and NAS100 on Ostium, the Order Book tab shows
+ On these markets, and on SP500 on Ostium, the Order Book tab shows
the two prices instead of a ladder.
Buy / Long fills at the ask and Sell / Short fills at the bid, plus a
slippage charge that grows with order size; see
Veranta and Ostium fills. The tab also shows the
spread between them, the spread cost of the order in your order ticket, and the spread cost per \$100K of order value. The
spread cost is what you give up by opening at one price and closing at the
other; trading fees are charged separately. Select Buy / Long or Sell / Short to
set that side on your order ticket. On a phone, this opens the order ticket.
US30 spreads can be high, so the order ticket shows a reminder under the
Buy / Long and Sell / Short button to check the estimated price before
− you trade. On SP500 and NAS100 on Ostium, the ticket shows the current spread
+ you trade. On SP500 on Ostium, the ticket shows the current spread
there whenever it is above 0.01%, with Switch to 24/7 to trade the market on
Hyperliquid instead.
US30 prices are index points. One unit of size is worth \$1 per
point, the same as every other market on the platform. Take Profit, Stop Loss,
− and other price triggers on these markets follow the venue's mid price. Check
− the order ticket for each market's current leverage and size requirements.
+ and other price triggers on Veranta, Ostium, and Composite follow the market's
+ mark (mid) price. Check the order ticket for each market's current leverage and
+ size requirements.
Trading hours
These markets follow their venue's trading sessions instead of trading around
the clock. Times are New York time:
| Markets | Weekly session | Daily break |
|---|---|---|
| EUR/USD, USD/JPY, GBP/USD, AUD/USD, USD/CAD, USD/CHF | Sunday 17:15 to Friday 17:00 | 17:00 to 17:15, Monday to Thursday |
−
| Markets | Weekly session | Daily break |
|---|---|---|
| US30, and SP500 and NAS100 on Ostium where offered | Sunday 18:00 to Friday 17:00 | 17:00 to 18:00, Monday to Thursday |
+
| Markets | Weekly session | Daily break |
|---|---|---|
| US30, and SP500 on Ostium where offered | Sunday 18:00 to Friday 17:00 | 17:00 to 18:00, Monday to Thursday |
The forex daily break is the market's daily rollover. In the weeks when the
United States and Europe change their clocks on different dates, it moves to
18:00 to 18:15 New York time. Venues also close early or for the full day on
some holidays. The trade page shows a Market Closed notice whenever a market
is outside its session.
Open positions stay open through a daily break; see
While a market is closed for what you can do
during one.
A badge beside the market name marks these markets in the trade page header,
the market picker, search, and the Markets page, so you can tell they do not
trade around the clock before you open one. FX pairs show 24/5, since they
trade from Sunday to Friday with only a 15-minute daily rollover. Markets with
Loss and Take Profit are edited under One-Click Trading by Market in
Trading settings. Markets without their own settings start from your Quick Size
amount and your TP/SL preset.
[!WARNING]
One-Click orders are sent immediately. Fills can differ from the price shown
when the market moves fast. Challenge rules, exposure limits, and order
validation still apply.
Choose an order type
| Order | What it does | Main tradeoff |
|---|---|---|
| Market | Fills the full size using the execution model described below. | Adverse slippage is capped by the market's published tier. |
| Limit | Rests at your price and fills in full there once the market reaches it. A limit placed through the market fills right away as a market order. | Controls price but may remain unfilled if the market never reaches the limit. |
| Stop / Take Profit | Watches a trigger and submits the configured exit behavior when reached. | A trigger is not a guaranteed fill price; execution still uses current market conditions. |
−
| Order | What it does | Main tradeoff |
|---|---|---|
| Triggers on Veranta and Ostium markets | Take Profit, Stop Loss, and other price triggers follow the venue's mid price. | The fill still uses the bid or ask, so it can differ from the mid price that triggered it. |
+
| Order | What it does | Main tradeoff |
|---|---|---|
| Triggers on Veranta, Ostium, and Composite markets | Take Profit, Stop Loss, and other price triggers follow the market's mid (mark) price. | The fill still uses the bid or ask, so it can differ from the mid price that triggered it. |
| Scheduled or advanced order | Breaks or manages an instruction using the controls shown in the order ticket. | Each generated order still passes the ordinary account and execution checks. |
Check the order ticket for the order types available on the selected market.
Select Reduce Only to cap an order at closing or shrinking an existing
position in the opposite direction. It is offered on every order type except
Take Market: a reduce-only take exit belongs on the position's Take Profit
instead. When an account restriction requires it, the option is locked on and
oversized requests are capped at the open position size.
If the selected account has an open position in the market, checking **Reduce
Only switches the ticket to the closing side: Sell / Short** for a long, or
Buy / Long for a short. The size control then sizes against that position.
Checking it with no position, or unchecking it, leaves the side unchanged. You
can still switch the side yourself afterwards.
| Open interest | Up to \$100,000 | Up to \$500,000 | Above \$500,000 |
|---|---|---|---|
| Above \$500M | 1.6 bps | 2.4 bps | 4.0 bps |
| \$100M to \$500M | 2.4 bps | 3.6 bps | 6.0 bps |
| \$25M to \$100M | 4.0 bps | 6.0 bps | 10.0 bps |
| \$10M to \$25M | 7.0 bps | 12.0 bps | 18.0 bps |
| Below \$10M | 12.0 bps | 20.0 bps | 32.0 bps |
When an instrument's open interest cannot be observed, the most conservative
band sets the cap; book prices inside the cap are still preserved. Resting
limit orders fill at exactly the limit price once both the opposing top of
book and the mark reference reach it. A limit placed through the market fills as a market order under this same
schedule, never worse than its limit.
Veranta and Ostium fills
− Forex on Veranta, and NAS100, SP500, and US30 on Ostium, fill at the venue's
+ Forex on Veranta, and SP500 and US30 on Ostium, fill at the venue's
ask for buys or bid for sells, moved against you by a slippage charge. There is
no cap from the mark, and a fill is never better than the mark. For buys, the
fill is ask × (1 + charge / 10,000); for sells, it is bid × (1 - charge /
10,000).
The charge depends on order notional at the mark. It rises in a straight line
between the amounts below and stays flat above \$2,000,000. For example, a
− \$50,000 NAS100 order pays 0.075 bps, and a \$150,000 EUR/USD order pays
+ \$50,000 SP500 order on Ostium pays 0.075 bps, and a \$150,000 EUR/USD order pays
0.065 bps.
− NAS100, SP500, and US30 on Ostium
+ SP500 and US30 on Ostium
| Order notional | Slippage charge |
|---|---|
| \$0 | 0 bps |
| \$100,000 | 0.15 bps |
| \$1,000,000 | 0.30 bps |
| \$2,000,000 | 0.60 bps |
Forex on Veranta
| Order notional | Slippage charge |
|---|---|
| \$0 | 0 bps |
| \$100,000 | 0.05 bps |
| \$200,000 | 0.08 bps |
| \$1,000,000 | 0.12 bps |
| \$2,000,000 | 0.15 bps |
while it waits to fill. Releasing one sets that order's waiting TP/SL, just
like editing it from Open Orders.
Each draft TP and SL line shows the estimated profit or loss in USD
next to its price, after estimated fees, once the order has a size. For a
market order the estimate follows the live price until you submit.
A dragged Take Profit or Stop Loss is kept on the correct side of the entry it
will protect: the trigger price of a Stop Market or Take Market order, or the
limit price of a limit, Stop Limit, or Take Limit order.
New Take Profit, Stop Loss, and other conditional orders use the market's
standard chart source:
| Venue | Trigger source |
|---|---|
| Binance, Bybit, Hyperliquid | Last traded price |
−
| Venue | Trigger source |
|---|---|
| Veranta (forex), Ostium | Mark price (venue mid) |
+
| Venue | Trigger source |
|---|---|
| Veranta (forex), Ostium, Composite | Mark price (venue mid) |
For Last Price triggers, one actual trade touching your level is enough,
including a small trade. The platform does not wait for the candle to close
or for the mark price to reach the same level. Liquidation and account loss
monitoring use their separate price references.
Orders placed before this update keep their original trigger policy. Editing
a trigger price or size does not switch that policy. To use the new policy,
cancel the old conditional order and place a replacement. Attached TP/SL also
keeps the policy of its entry order if that entry fills after the update.
How triggered Stop Loss and Take Profit exits fill
When a Stop Loss or Take Profit market exit triggers, the platform looks up the
first recorded best bid and ask at or after the moment the trigger was touched.
If that touch quote is available and the order and position have not changed
Layout menu, split the chart area into One Chart, Two Charts** side by
side, or Four Charts in a grid. Every chart is a full
chart with your indicators, drawing tools, saved chart layouts, and position
and order lines for the market it shows.
- The first chart always shows the market in the address bar. Picking a
different market in its header opens that market's trade page.
- Each other chart has its own market picker in its header and keeps its own
timeframe, so you can watch different markets, or the same market on
different timeframes. Its Alerts button lists your price alerts and
creates new ones on that chart's market. Changing its market or timeframe
does not retarget the other charts. Markets with
two trading-hour options, such as
− SP500 and NAS100, follow the Trading Hours picker in the market bar on
+ SP500, follow the Trading Hours picker in the market bar on
every chart, so the same market shows the same prices on each. A chart the layout shows for the first time starts on the market in the address
bar, on the 1h, 4h, or daily timeframe.
- Saved chart customizations are shared across charts. Charts showing the same
market on the same venue show the same drawings, even on different
timeframes, and a drawing edited on one appears on the others within a
couple of seconds (see Chart drawings).
- Click a chart to trade its market. The active chart gets a highlighted
border, and the order ticket, order book, and One-Click window switch to its
market. When that market differs from the address bar, the ticket and book
show a "Following chart" strip with the market name, and the buy and sell
buttons name the market, so you can confirm it before you submit. While two
or four charts show, the One-Click window's header names the market its