RULE CHANGE
Trading Settings
iOS order ticket adds Minis and Micros support with unit selection; slippage limit range specified as 0.4% to 10% with floor conversion.
What this means
iOS platform now offers Minis and Micros contract denominations for supported markets via unit menu beside Size, with Quick Size market overrides supporting either contract unit and futures sizing preference shared with website. Slippage limit accepts values from 0.4% to 10%, and any lower value saved earlier is applied as 0.4% minimum, which remains above the widest market slippage cap.
▸ View exact changes
What the page said before and after
Before Nov 16, 2026
size.
You can set either leg alone. Save or change the preset here, or enter a Gain
and Loss in the order ticket and select Save (or Update) next to
Preset in the Take Profit / Stop Loss section. Select Clear there, or
empty both fields here, to remove it. A ticket where you already entered a
Take Profit or Stop Loss keeps your values. After an order is accepted, the
ticket refills the preset for your next order.
Mini and micro modes match the selected real-world contract's dollar-per-point
exposure with a platform perpetual position. They use the market's maximum
leverage to calculate required margin and round position size down to the
market's supported size increment. Other markets show only USD and asset units;
the platform does not infer a futures multiplier.
Order Presets
The order ticket includes three editable Quick Size buttons for opening
orders and three editable buttons for closing the current position, 25%, 50%,
and 100% by default. The helper beside the execution buttons reads:
"Tap an amount to submit an order." Quick Size is one tap: each button places
the order immediately, with no review step,
using the rest of the ticket as it stands (order type, leverage, margin mode,
and any Take Profit or Stop Loss). Open buttons follow the side selected in the
ticket, labeled Long or Short, and size the order as a USD notional amount. Open
sizes default to values matched to the account's balance tier and remain
editable. Close buttons appear when you hold a position in the selected market
and send a reduce-only order on the opposing side for that share of the
review dialogs, risk checks, and disabled states as their on-screen buttons.
For Cancel All and Close All, the configured shortcut only opens the review
dialog. The Confirm button receives focus and displays an Enter hint; press
Enter as a separate second step to accept the bulk action. The order-size
shortcut focuses and selects the Size field, so typing replaces its current
value.
Execution Protection
Max Market Slippage Setting
Set the maximum adverse fill movement accepted for ordinary market orders and
individual position closes. The server enforces the saved value. A tighter
limit can reject more orders in fast or thin markets; a wider limit accepts more
price movement.
Close All retains its own protective exit limit so the platform can preserve
the emergency close behavior.
Leverage caps
Set separate caps for non-Forex and Forex markets. A cap limits the leverage
available in your order ticket; it cannot raise leverage above a market's own
maximum. Leave the field blank to use the selected market's maximum.
Warn Without Stop Loss Setting
Turn this on to request confirmation when an order can increase exposure without
an attached Stop Loss. The prompt is a warning, not a rule: confirming can still
submit the order.
Resize TP/SL With Position Setting
This setting is on by default. When you add to a position, your resting Take
After Nov 19, 2026
size.
You can set either leg alone. Save or change the preset here, or enter a Gain
and Loss in the order ticket and select Save (or Update) next to
Preset in the Take Profit / Stop Loss section. Select Clear there, or
empty both fields here, to remove it. A ticket where you already entered a
Take Profit or Stop Loss keeps your values. After an order is accepted, the
ticket refills the preset for your next order.
Mini and micro modes match the selected real-world contract's dollar-per-point
exposure with a platform perpetual position. They use the market's maximum
leverage to calculate required margin and round position size down to the
market's supported size increment. Other markets show only USD and asset units;
the platform does not infer a futures multiplier.
+ The iOS order ticket also offers Minis and Micros for these supported
+ markets. Use the unit menu beside Size to choose a denomination. Contract counts
+ round down to whole contracts, and Quick Size market overrides can use either
+ contract unit. The futures sizing preference is shared with the website;
+ standard markets keep their separate USD or asset default.
Order Presets
The order ticket includes three editable Quick Size buttons for opening
orders and three editable buttons for closing the current position, 25%, 50%,
and 100% by default. The helper beside the execution buttons reads:
"Tap an amount to submit an order." Quick Size is one tap: each button places
the order immediately, with no review step,
using the rest of the ticket as it stands (order type, leverage, margin mode,
and any Take Profit or Stop Loss). Open buttons follow the side selected in the
ticket, labeled Long or Short, and size the order as a USD notional amount. Open
sizes default to values matched to the account's balance tier and remain
editable. Close buttons appear when you hold a position in the selected market
and send a reduce-only order on the opposing side for that share of the
review dialogs, risk checks, and disabled states as their on-screen buttons.
For Cancel All and Close All, the configured shortcut only opens the review
dialog. The Confirm button receives focus and displays an Enter hint; press
Enter as a separate second step to accept the bulk action. The order-size
shortcut focuses and selects the Size field, so typing replaces its current
value.
Execution Protection
Max Market Slippage Setting
Set the maximum adverse fill movement accepted for ordinary market orders and
individual position closes. The server enforces the saved value. A tighter
limit can reject more orders in fast or thin markets; a wider limit accepts more
price movement.
+ The setting accepts values from 0.4% to 10%. A lower value saved earlier is
+ applied as 0.4%, which keeps it above the widest
+ market slippage cap so the cap
+ alone never rejects an order.
Close All retains its own protective exit limit so the platform can preserve
the emergency close behavior.
Leverage caps
Set separate caps for non-Forex and Forex markets. A cap limits the leverage
available in your order ticket; it cannot raise leverage above a market's own
maximum. Leave the field blank to use the selected market's maximum.
Warn Without Stop Loss Setting
Turn this on to request confirmation when an order can increase exposure without
an attached Stop Loss. The prompt is a warning, not a rule: confirming can still
submit the order.
Resize TP/SL With Position Setting
This setting is on by default. When you add to a position, your resting Take
size.
You can set either leg alone. Save or change the preset here, or enter a Gain
and Loss in the order ticket and select Save (or Update) next to
Preset in the Take Profit / Stop Loss section. Select Clear there, or
empty both fields here, to remove it. A ticket where you already entered a
Take Profit or Stop Loss keeps your values. After an order is accepted, the
ticket refills the preset for your next order.
Mini and micro modes match the selected real-world contract's dollar-per-point
exposure with a platform perpetual position. They use the market's maximum
leverage to calculate required margin and round position size down to the
market's supported size increment. Other markets show only USD and asset units;
the platform does not infer a futures multiplier.
+ The iOS order ticket also offers Minis and Micros for these supported
+ markets. Use the unit menu beside Size to choose a denomination. Contract counts
+ round down to whole contracts, and Quick Size market overrides can use either
+ contract unit. The futures sizing preference is shared with the website;
+ standard markets keep their separate USD or asset default.
Order Presets
The order ticket includes three editable Quick Size buttons for opening
orders and three editable buttons for closing the current position, 25%, 50%,
and 100% by default. The helper beside the execution buttons reads:
"Tap an amount to submit an order." Quick Size is one tap: each button places
the order immediately, with no review step,
using the rest of the ticket as it stands (order type, leverage, margin mode,
and any Take Profit or Stop Loss). Open buttons follow the side selected in the
ticket, labeled Long or Short, and size the order as a USD notional amount. Open
sizes default to values matched to the account's balance tier and remain
editable. Close buttons appear when you hold a position in the selected market
and send a reduce-only order on the opposing side for that share of the
review dialogs, risk checks, and disabled states as their on-screen buttons.
For Cancel All and Close All, the configured shortcut only opens the review
dialog. The Confirm button receives focus and displays an Enter hint; press
Enter as a separate second step to accept the bulk action. The order-size
shortcut focuses and selects the Size field, so typing replaces its current
value.
Execution Protection
Max Market Slippage Setting
Set the maximum adverse fill movement accepted for ordinary market orders and
individual position closes. The server enforces the saved value. A tighter
limit can reject more orders in fast or thin markets; a wider limit accepts more
price movement.
+ The setting accepts values from 0.4% to 10%. A lower value saved earlier is
+ applied as 0.4%, which keeps it above the widest
+ market slippage cap so the cap
+ alone never rejects an order.
Close All retains its own protective exit limit so the platform can preserve
the emergency close behavior.
Leverage caps
Set separate caps for non-Forex and Forex markets. A cap limits the leverage
available in your order ticket; it cannot raise leverage above a market's own
maximum. Leave the field blank to use the selected market's maximum.
Warn Without Stop Loss Setting
Turn this on to request confirmation when an order can increase exposure without
an attached Stop Loss. The prompt is a warning, not a rule: confirming can still
submit the order.
Resize TP/SL With Position Setting
This setting is on by default. When you add to a position, your resting Take