PERPETUAL FUTURES24/7 crypto, index and commodity perps
Featured Firm VestVest 5% OFF all plans · from $10 · NQ 50x · no swap fee · USDC payouts on-chain 5% Off Code JMU

RULE CHANGE

Rule Radar

Trading Guide

My Funded Perpetuals changed this help center article on November 2, 2026. Updated Neutral

Symbol picker now reopens on your last-chosen tab and saves position; market order fill rules clarified with new triggered Stop Loss/Take Profit section; added unconfirmed market order handling.


What this means

Symbol picker reopens on your last-chosen tab (Watchlist, All, or category) and this choice is saved to your profile across devices. Market order fill rules were reorganized: triggered Stop Loss and Take Profit market exits now have their own detailed section explaining they fill from the touch quote when available, with slippage measured from the touch midpoint rather than the current mark, and can fill beyond the cap when spreads are wide. A new "Reading slippage on a closed position" section explains two slippage figures: Slippage (measured against market reference at each fill) and Exit slippage vs trigger (measured against the closing order's trigger price). New section on unconfirmed market orders describes how the app handles orders when connection drops or pa...

▸ View exact changes
The change in place, line by line
slot everywhere. Crypto and traditional instruments that share a ticker are
separate markets.
+ The symbol picker reopens on the tab you last chose, such as Watchlist, All,
+ or a category. Your choice is saved to your profile, so it follows you across
+ devices.
+ The picker's Watchlist tab lists markets in your saved order. Drag a market by
+ its handle to move it; the new order applies everywhere your watchlist
+ appears. Choosing a column or sort sorts the list for now and hides the
+ handles. Choose the same column a third time to return to your saved order.
Open Configure Watchlist from the bottom-bar Watchlist to remove markets or
drag them into your preferred order. Your watchlist is saved to your profile
order instead.
How market orders fill
− Market orders, including triggered stop and take-profit market exits, fill
− their whole size at the best ask for buys or the best bid for sells, with
− maximum adverse slippage capped against the current mark reference. Each
− published tier is a worst-case bound, not a fixed fill offset. If the book
+ Market orders fill their whole size at the best ask for buys or the best bid
+ for sells, with maximum adverse slippage capped against the current mark
+ reference. Each published tier is a worst-case bound, not a fixed fill offset. If the book
offers a price inside the cap, your order receives that price. A fill is never
better than the mark itself: buys fill at or above the mark and sells at or
\$100 and a 1 bps cap, a best ask of \$100.005 fills at \$100.005; a best ask of
\$100.02 fills at the \$100.01 cap; a best ask of \$99.99 fills at the \$100 mark.
+ Liquidations, automatic close-outs, and Stop Loss or Take Profit market exits
+ that use ordinary current-quote execution follow the same rule. A Stop Loss or
+ Take Profit market exit that fills at its touch quote is different: when the
+ spread is wider than the cap, it fills at the touch bid or ask, which can be
+ further from the mark than the cap. See
+ How triggered Stop Loss and Take Profit exits fill.
Forex markets use the same rules with the forex slippage tier as the cap. The
tier is selected from order notional at the mark. FX limits retain their
or for the mark price to reach the same level. Liquidation and account loss
monitoring use their separate price references.
− Protective market Stop Loss and Take Profit orders can execute using the
− first recorded best bid or ask at or after the touch when eligible quote evidence
− is available and the order and position have not changed. That price stays fixed
− while the fill is processed. Recent edits or position increases, missing quote
− history, and unusually wide spreads use the ordinary current-quote path instead.
− If a current quote is too old or predates the trigger, execution waits for a newer
− quote. The trigger price is still not a guaranteed
− fill price, and fast moves or temporary data delays can affect the result.
− Limit exits continue to require their limit-price conditions.
− This first recorded quote can be up to one second after the touch on Hyperliquid
− and up to half a second on Binance and Bybit. If the gap in quote history exceeds
− the venue's limit, the order uses ordinary current-quote execution.
Orders placed before this update keep their original trigger policy. Editing
a trigger price or size does not switch that policy. To use the new policy,
cancel the old conditional order and place a replacement. Attached TP/SL also
keeps the policy of its entry order if that entry fills after the update.
+ How triggered Stop Loss and Take Profit exits fill
+ When a Stop Loss or Take Profit market exit triggers, the platform looks up the
+ first recorded best bid and ask at or after the moment the trigger was touched.
+ If that touch quote is available and the order and position have not changed
+ since, the exit fills from the touch quote, and that price stays fixed while
+ the fill is processed:
+ - A sell (closing a long) fills at the best bid seen at the touch. A buy
+ (closing a short) fills at the best ask seen at the touch.
+ - The slippage cap is measured from the touch quote's midpoint (the average of
+ its bid and ask). When the touch bid or ask is inside the cap, you get that
+ price. The fill is never better than the midpoint.
+ - When the spread is wider than the cap, the exit fills at the touch bid or ask
+ itself, not at the capped price. That fill can be further from the midpoint
+ than the published tier. The exit is not repriced from a later quote.
+ - If the touch bid or ask is beyond the order's own slippage tolerance from
+ the midpoint, the touch quote is not used and the exit uses ordinary
+ current-quote execution instead.
+ For example, a long position's Stop Loss at \$28,501.99 on NAS100 triggers
+ during a fast sell-off. The touch quote is a \$28,499 bid and a \$28,533 ask, so
+ the midpoint is \$28,516. A 1 bps cap from that midpoint would be \$28,513.15,
+ but no buyer was bidding that price. The stop fills at the \$28,499 bid.
+ Wide spreads are most common in thin conditions: fast moves, low liquidity,
+ and the 24/7 option of index and commodity markets outside regular market
+ hours, including weekends. In those conditions a triggered exit can fill well
+ away from the midpoint.
+ Orders that keep the original trigger policy, recent edits or position
+ increases, and missing quote history use ordinary current-quote execution, which applies the capped rule in
+ How market orders fill to the current quote. If a
+ current quote is too old or predates the trigger, execution waits for a newer
+ quote. The trigger price is not a guaranteed fill price, and fast moves or
+ temporary data delays can affect the result. Limit exits continue to require
+ their limit-price conditions.
+ The first recorded quote can be up to one second after the touch on Hyperliquid
+ and up to half a second on Binance and Bybit. If the gap in quote history exceeds
+ the venue's limit, the order uses ordinary current-quote execution.
+ Reading slippage on a closed position
+ A closed position can show two slippage figures, measured against different
+ prices:
+
FigureMeasured againstWhat it includes
SlippageThe market reference (the midpoint for order-book markets) at the moment each fill executedEvery entry and exit fill on the position, combined.
Exit slippage vs triggerThe closing Stop Loss or Take Profit order's trigger price, times its sizeOnly that closing order.
+ In order history, a filled Stop Loss, Take Profit, or other triggered order
+ shows Slippage vs trigger for the same comparison. For both figures, a
+ positive value means the fill was worse than its reference and a negative value
+ means it was better. Both are already included in your PnL and are separate
+ from fees.
+ The two can differ a lot. In the NAS100 example above, the stop filled
+ \$2.99 per unit below its trigger but \$17 per unit below the touch midpoint, so the position's
+ Slippage total is larger than its Exit slippage vs trigger. A large
+ Slippage figure on a stopped-out position usually reflects a wide spread
+ at the touch, not a fill far from your stop.
Adding to a position with attached TP/SL
When you add to a position you already hold and attach a Take Profit or Stop
Do not repeatedly resubmit an unchanged order. If the reason remains unclear,
use Troubleshooting and FAQ.
+ Unconfirmed market orders
+ If the connection drops or the page reloads while a market order is on its
+ way, the app may not learn whether the order went through. A notice above your
+ positions then shows the order as unconfirmed. Within about 30 seconds of
+ sending it, the app checks with the server once: an order the server received
+ is settled and appears in your positions and order history, and an order that
+ never arrived is cleared. Either way the notice disappears.
+ While an order is unconfirmed, new market orders that open a position on the
+ same account wait, so a reload cannot place the same trade twice. Closing a
+ position, Close All, and Flat are never held back. If the notice stays,
+ check your positions and order history, then choose Retry original to
+ resend the same order (it cannot fill twice) or Dismiss to clear it.
Today's fill statistics
The dashboard counts fills on the day they settle, even if you placed the order

Every My Funded Perpetuals changeRule Radar: all firms

Scroll to Top