RULE CHANGE
Trading Guide
Take Profit and Stop Loss can now attach to Take Market and Take Limit entries, plus clarification on draft line behavior.
What this means
Take Market and Take Limit entries now accept Take Profit and Stop Loss attachments, whereas previously only market, limit, Stop Market, and Stop Limit entries could carry them. Reduce-only orders remain unable to carry TP/SL. Draft lines now show TP/SL handles for limit, Stop Market, Stop Limit, Take Market, and Take Limit orders once prices are filled in. Placed limit, stop, or take entries waiting to fill now display the same handles for editing their waiting TP/SL.
▸ View exact changes
What the page said before and after
Before Oct 31, 2026
Trading settings). Review
the trigger, direction, quantity, and whether the exit uses market or limit
behavior where the ticket offers that choice.
For a new order, you can enter either a trigger price or an estimated gain or
loss. The last field you edit controls the target. If you enter a USD amount or
percentage, the draft trigger price updates with the estimated entry price,
size, leverage, and fees until you submit. If you enter or drag the trigger
price, that price stays fixed and the gain or loss estimate updates instead.
If you switch between Long and Short, a fixed Take Profit or Stop Loss price
moves to the other side of the entry price at the same distance, so it still
protects the new direction. Once submitted, the order uses its saved trigger
price.
− You can attach a Take Profit and Stop Loss to market, limit, Stop Market, and
− Stop Limit entries. On a limit or stop entry, the TP/SL waits with the order and
− is placed only when the entry fills, so it cannot trigger before you have a
− position. A TP/SL on a Stop Market entry is checked against its trigger price,
− and on a Stop Limit entry against its limit price. If the entry fills at a price
− that would put the Take Profit or Stop Loss on the wrong side of your entry, the
− order is rejected instead of opening an unprotected position. You can change or
− remove a waiting TP/SL from Open Orders until the entry fills. Take Market,
− Take Limit, and reduce-only orders cannot carry a TP/SL.
− While you draft a limit order, the draft limit line on the chart shows TP
− and SL handles. Drag a handle up or down to set that Take Profit or Stop
Loss price. The ticket turns on TP/SL and fills in the price, and the draft
line stays in sync with the ticket as you edit either one. Nothing is placed
until you submit the order. A handle is hidden once its level is set, and the
SL handle is hidden while a trailing stop is selected. The selected amount is
an estimate, not a guaranteed final profit or loss.
New Take Profit, Stop Loss, and other conditional orders use the market's
standard chart source:
| Venue | Trigger source |
|---|---|
| Binance, Bybit, Hyperliquid | Last traded price |
| Veranta (forex), Ostium | Mark price (venue mid) |
For Last Price triggers, one actual trade touching your level is enough,
including a small trade. The platform does not wait for the candle to close
or for the mark price to reach the same level. Liquidation and account loss
monitoring use their separate price references.
Protective market Stop Loss and Take Profit orders can execute using the
first recorded best bid or ask at or after the touch when eligible quote evidence
is available and the order and position have not changed. That price stays fixed
After Oct 31, 2026
Trading settings). Review
the trigger, direction, quantity, and whether the exit uses market or limit
behavior where the ticket offers that choice.
For a new order, you can enter either a trigger price or an estimated gain or
loss. The last field you edit controls the target. If you enter a USD amount or
percentage, the draft trigger price updates with the estimated entry price,
size, leverage, and fees until you submit. If you enter or drag the trigger
price, that price stays fixed and the gain or loss estimate updates instead.
If you switch between Long and Short, a fixed Take Profit or Stop Loss price
moves to the other side of the entry price at the same distance, so it still
protects the new direction. Once submitted, the order uses its saved trigger
price.
+ You can attach a Take Profit and Stop Loss to market, limit, Stop Market, Stop
+ Limit, Take Market, and Take Limit entries. On a limit, stop, or take entry, the
+ TP/SL waits with the order and is placed only when the entry fills, so it cannot
+ trigger before you have a position. A TP/SL on a Stop Market or Take Market
+ entry is checked against its trigger price, and on a Stop Limit or Take Limit
+ entry against its limit price. If the entry fills at a price that would put the
+ Take Profit or Stop Loss on the wrong side of your entry, the order is rejected
+ instead of opening an unprotected position. You can change or remove a waiting
+ TP/SL from Open Orders until the entry fills. Reduce-only orders cannot
+ carry a TP/SL.
+ While you draft a limit, Stop Market, Stop Limit, Take Market, or Take Limit
+ order, its draft line on the chart shows TP and SL handles once its
+ prices are filled in. Drag a handle up or down to set that Take Profit or Stop
Loss price. The ticket turns on TP/SL and fills in the price, and the draft
line stays in sync with the ticket as you edit either one. Nothing is placed
until you submit the order. A handle is hidden once its level is set, and the
SL handle is hidden while a trailing stop is selected. The selected amount is
an estimate, not a guaranteed final profit or loss.
+ The same handles appear on the line of a placed limit, stop, or take entry
+ while it waits to fill. Releasing one sets that order's waiting TP/SL, just
+ like editing it from Open Orders.
+ A dragged Take Profit or Stop Loss is kept on the correct side of the entry it
+ will protect: the trigger price of a Stop Market or Take Market order, or the
+ limit price of a limit, Stop Limit, or Take Limit order.
New Take Profit, Stop Loss, and other conditional orders use the market's
standard chart source:
| Venue | Trigger source |
|---|---|
| Binance, Bybit, Hyperliquid | Last traded price |
| Veranta (forex), Ostium | Mark price (venue mid) |
For Last Price triggers, one actual trade touching your level is enough,
including a small trade. The platform does not wait for the candle to close
or for the mark price to reach the same level. Liquidation and account loss
monitoring use their separate price references.
Protective market Stop Loss and Take Profit orders can execute using the
first recorded best bid or ask at or after the touch when eligible quote evidence
is available and the order and position have not changed. That price stays fixed
Trading settings). Review
the trigger, direction, quantity, and whether the exit uses market or limit
behavior where the ticket offers that choice.
For a new order, you can enter either a trigger price or an estimated gain or
loss. The last field you edit controls the target. If you enter a USD amount or
percentage, the draft trigger price updates with the estimated entry price,
size, leverage, and fees until you submit. If you enter or drag the trigger
price, that price stays fixed and the gain or loss estimate updates instead.
If you switch between Long and Short, a fixed Take Profit or Stop Loss price
moves to the other side of the entry price at the same distance, so it still
protects the new direction. Once submitted, the order uses its saved trigger
price.
− You can attach a Take Profit and Stop Loss to market, limit, Stop Market, and
− Stop Limit entries. On a limit or stop entry, the TP/SL waits with the order and
− is placed only when the entry fills, so it cannot trigger before you have a
− position. A TP/SL on a Stop Market entry is checked against its trigger price,
− and on a Stop Limit entry against its limit price. If the entry fills at a price
− that would put the Take Profit or Stop Loss on the wrong side of your entry, the
− order is rejected instead of opening an unprotected position. You can change or
− remove a waiting TP/SL from Open Orders until the entry fills. Take Market,
− Take Limit, and reduce-only orders cannot carry a TP/SL.
− While you draft a limit order, the draft limit line on the chart shows TP
− and SL handles. Drag a handle up or down to set that Take Profit or Stop
+ You can attach a Take Profit and Stop Loss to market, limit, Stop Market, Stop
+ Limit, Take Market, and Take Limit entries. On a limit, stop, or take entry, the
+ TP/SL waits with the order and is placed only when the entry fills, so it cannot
+ trigger before you have a position. A TP/SL on a Stop Market or Take Market
+ entry is checked against its trigger price, and on a Stop Limit or Take Limit
+ entry against its limit price. If the entry fills at a price that would put the
+ Take Profit or Stop Loss on the wrong side of your entry, the order is rejected
+ instead of opening an unprotected position. You can change or remove a waiting
+ TP/SL from Open Orders until the entry fills. Reduce-only orders cannot
+ carry a TP/SL.
+ While you draft a limit, Stop Market, Stop Limit, Take Market, or Take Limit
+ order, its draft line on the chart shows TP and SL handles once its
+ prices are filled in. Drag a handle up or down to set that Take Profit or Stop
Loss price. The ticket turns on TP/SL and fills in the price, and the draft
line stays in sync with the ticket as you edit either one. Nothing is placed
until you submit the order. A handle is hidden once its level is set, and the
SL handle is hidden while a trailing stop is selected. The selected amount is
an estimate, not a guaranteed final profit or loss.
+ The same handles appear on the line of a placed limit, stop, or take entry
+ while it waits to fill. Releasing one sets that order's waiting TP/SL, just
+ like editing it from Open Orders.
+ A dragged Take Profit or Stop Loss is kept on the correct side of the entry it
+ will protect: the trigger price of a Stop Market or Take Market order, or the
+ limit price of a limit, Stop Limit, or Take Limit order.
New Take Profit, Stop Loss, and other conditional orders use the market's
standard chart source:
| Venue | Trigger source |
|---|---|
| Binance, Bybit, Hyperliquid | Last traded price |
| Veranta (forex), Ostium | Mark price (venue mid) |
For Last Price triggers, one actual trade touching your level is enough,
including a small trade. The platform does not wait for the candle to close
or for the mark price to reach the same level. Liquidation and account loss
monitoring use their separate price references.
Protective market Stop Loss and Take Profit orders can execute using the
first recorded best bid or ask at or after the touch when eligible quote evidence
is available and the order and position have not changed. That price stays fixed