RULE CHANGE
Trading Settings
Clarified that Confirm New Orders does not apply to Reverse Position or One-Click Trading, removed note about reset, and added new One-Click Trading section with 6+ settings.
What this means
Reverse Position no longer uses the Confirm New Orders choice but instead follows Confirm Reverse Position setting. One-Click Trading is a new feature enabled by default that sends market orders immediately without review, with per-market customizable size and stop-loss/take-profit settings up to 50 markets. The prior note that "This update resets previous confirmation choices to off for everyone" was removed. Confirm TP/SL Chart Drags remains off by default.
▸ View exact changes
The change in place, line by line
Before Oct 14, 2026
after you add 0.5 BTC. Sizes round down to the market's size step, so the exits
never cover more than you hold.
If the order that adds to the position carries its own Take Profit or Stop
Loss, that exit already covers the full result, so your existing exits of that
kind are not resized. An exit that is executing at that moment is not resized.
Turn this off to keep existing TP/SL sizes unchanged when you add to a position.
Trade Confirmations
Confirm New Orders has three options:
| Option | Behavior |
|---|---|
| Never | Submit without an additional review dialog. |
| Market Orders | Review orders that execute at market before submitting, including immediate market, scheduled, stop/take-market, and conditional orders. |
| All Orders | Review every supported new order beforehand. |
− The same choice applies to
− Reverse Position: with Never,
− clicking it reverses the position right away; with Market Orders or **All
− Orders**, it opens a short review first.
Confirm TP/SL Chart Drags asks before a chart drag places or moves a Take
Profit or Stop Loss order. It is off by default, so releasing a drag applies the
change immediately. Turn it on if you want to review each change before it is
− submitted. This update resets previous confirmation choices to off for everyone.
− You can turn confirmation back on, and that new choice is saved.
When you release a chart drag, the order line stays at the new price. A small
loading icon shows while the update is being confirmed. If chart confirmations
are enabled, the icon appears after you confirm. It disappears when the update
is applied; queued moves keep it until processing finishes. If the update fails,
the chart restores the confirmed price or removes an unsuccessful new TP/SL.
This confirms the order update, not a trade fill. Fills appear separately on the
chart when the order executes.
One-Click Chart Close changes the X next to the PnL on the chart's position
line. It is off by default, so clicking the X opens the close dialog where you
choose the size and order type. Turn it on to close the whole position with a
market order as soon as you click the X. The close uses your saved
Max Market Slippage and skips the close dialog
Show Reverse Position controls whether the
Reverse Position button appears. It
is on by default. Turn it off to remove the button from the chart's position
line, the Positions tab, and the position cards on a phone, so you cannot
reverse a position by mistake. Your positions and orders are not affected, and
you can still flip a position with an opposite order larger than it.
Confirm Reverse Position opens a review before a reversal is sent. It is on
by default, separate from Confirm New Orders. Turn it off to reverse a
position as soon as you click Reverse. The review still opens if a current
price is not available, or if you lead a copy trading group so you can see each
follower's result. This option is unavailable while Show Reverse Position is
off.
Trade Notifications
Choose whether the app shows notifications for market-order fills, resting
limit/stop fills, Take Profit fills, Stop Loss fills, order changes, and TP/SL
changes. These are visual notifications. Configure audio separately under
Notifications settings.
Fills that settle while your notification preferences are still loading are
announced as soon as loading finishes, even when newer fills have arrived in
the meantime. Notifications are a convenience, not an execution record: confirm
fill history on the trade page when precision matters.
For workflow examples, read the Trading Guide.
Trader Lockout
Use Trader Lockout in Trading settings to take a voluntary break. Choose
After Oct 15, 2026
after you add 0.5 BTC. Sizes round down to the market's size step, so the exits
never cover more than you hold.
If the order that adds to the position carries its own Take Profit or Stop
Loss, that exit already covers the full result, so your existing exits of that
kind are not resized. An exit that is executing at that moment is not resized.
Turn this off to keep existing TP/SL sizes unchanged when you add to a position.
Trade Confirmations
Confirm New Orders has three options:
| Option | Behavior |
|---|---|
| Never | Submit without an additional review dialog. |
| Market Orders | Review orders that execute at market before submitting, including immediate market, scheduled, stop/take-market, and conditional orders. |
| All Orders | Review every supported new order beforehand. |
+ This choice does not apply to
+ Reverse Position or One-Click
+ Trading. Reversals follow Confirm Reverse Position below, and One-Click
+ Trading never shows a review.
Confirm TP/SL Chart Drags asks before a chart drag places or moves a Take
Profit or Stop Loss order. It is off by default, so releasing a drag applies the
change immediately. Turn it on if you want to review each change before it is
+ submitted.
When you release a chart drag, the order line stays at the new price. A small
loading icon shows while the update is being confirmed. If chart confirmations
are enabled, the icon appears after you confirm. It disappears when the update
is applied; queued moves keep it until processing finishes. If the update fails,
the chart restores the confirmed price or removes an unsuccessful new TP/SL.
This confirms the order update, not a trade fill. Fills appear separately on the
chart when the order executes.
One-Click Chart Close changes the X next to the PnL on the chart's position
line. It is off by default, so clicking the X opens the close dialog where you
choose the size and order type. Turn it on to close the whole position with a
market order as soon as you click the X. The close uses your saved
Max Market Slippage and skips the close dialog
Show Reverse Position controls whether the
Reverse Position button appears. It
is on by default. Turn it off to remove the button from the chart's position
line, the Positions tab, and the position cards on a phone, so you cannot
reverse a position by mistake. Your positions and orders are not affected, and
you can still flip a position with an opposite order larger than it.
Confirm Reverse Position opens a review before a reversal is sent. It is on
by default, separate from Confirm New Orders. Turn it off to reverse a
position as soon as you click Reverse. The review still opens if a current
price is not available, or if you lead a copy trading group so you can see each
follower's result. This option is unavailable while Show Reverse Position is
off.
+ One-Click Trading
+ One-Click Trading shows a small window with Sell, Buy, and
+ Flat on the trade page. It is on by default. Buy and Sell send a market
+ order the moment you tap, with no review step, even if Confirm New Orders
+ asks you to review orders placed from the order ticket. Turn the switch off to
+ remove the window and its button.
+ One-Click orders are sent immediately. Fills can differ from the price shown
+ when the market moves fast. Challenge rules, exposure limits, and order
+ validation still apply.
+ The first time you use it, a notice explains how it works. Check **I understand
+ orders send without confirmation. and select Continue (or Turn On** if
+ you are turning the switch on in Settings). Your agreement is saved to your
+ account, so the notice does not appear again on other devices. Cancel sends
+ nothing.
+ Show Flat Button appears while One-Click Trading is on and is on by
+ default. Flat closes your whole position in that market and cancels the
+ market's open orders in one tap. Turn it off to hide Flat from the window.
+ One-Click Trading by Market lists the markets that have their own One-Click
+ settings. For each market you can change:
+
| Setting | Options |
|---|---|
| One-Click Size and Size Unit | USD, the asset, or Minis and Micros on supported index and commodity markets |
| One-Click Stop Loss / Take Profit | Leave empty for none, or enter an amount above 0 |
| Stop Loss and Take Profit Unit | Points, %, or USD |
+ Markets are added here when you change the size in the One-Click window. Other
+ markets start from your Quick Size amount and your
+ TP/SL Preset under Order Defaults. You can save One-Click settings for up to 50
+ markets. See One-Click Trading in
+ the Trading Guide for how the window works.
Trade Notifications
Choose whether the app shows notifications for market-order fills, resting
limit/stop fills, Take Profit fills, Stop Loss fills, order changes, and TP/SL
changes. These are visual notifications. Configure audio separately under
Notifications settings.
Fills that settle while your notification preferences are still loading are
announced as soon as loading finishes, even when newer fills have arrived in
the meantime. Notifications are a convenience, not an execution record: confirm
fill history on the trade page when precision matters.
For workflow examples, read the Trading Guide.
Trader Lockout
Use Trader Lockout in Trading settings to take a voluntary break. Choose
after you add 0.5 BTC. Sizes round down to the market's size step, so the exits
never cover more than you hold.
If the order that adds to the position carries its own Take Profit or Stop
Loss, that exit already covers the full result, so your existing exits of that
kind are not resized. An exit that is executing at that moment is not resized.
Turn this off to keep existing TP/SL sizes unchanged when you add to a position.
Trade Confirmations
Confirm New Orders has three options:
| Option | Behavior |
|---|---|
| Never | Submit without an additional review dialog. |
| Market Orders | Review orders that execute at market before submitting, including immediate market, scheduled, stop/take-market, and conditional orders. |
| All Orders | Review every supported new order beforehand. |
− The same choice applies to
− Reverse Position: with Never,
− clicking it reverses the position right away; with Market Orders or **All
− Orders**, it opens a short review first.
+ This choice does not apply to
+ Reverse Position or One-Click
+ Trading. Reversals follow Confirm Reverse Position below, and One-Click
+ Trading never shows a review.
Confirm TP/SL Chart Drags asks before a chart drag places or moves a Take
Profit or Stop Loss order. It is off by default, so releasing a drag applies the
change immediately. Turn it on if you want to review each change before it is
− submitted. This update resets previous confirmation choices to off for everyone.
− You can turn confirmation back on, and that new choice is saved.
+ submitted.
When you release a chart drag, the order line stays at the new price. A small
loading icon shows while the update is being confirmed. If chart confirmations
are enabled, the icon appears after you confirm. It disappears when the update
is applied; queued moves keep it until processing finishes. If the update fails,
the chart restores the confirmed price or removes an unsuccessful new TP/SL.
This confirms the order update, not a trade fill. Fills appear separately on the
chart when the order executes.
One-Click Chart Close changes the X next to the PnL on the chart's position
line. It is off by default, so clicking the X opens the close dialog where you
choose the size and order type. Turn it on to close the whole position with a
market order as soon as you click the X. The close uses your saved
Max Market Slippage and skips the close dialog
Show Reverse Position controls whether the
Reverse Position button appears. It
is on by default. Turn it off to remove the button from the chart's position
line, the Positions tab, and the position cards on a phone, so you cannot
reverse a position by mistake. Your positions and orders are not affected, and
you can still flip a position with an opposite order larger than it.
Confirm Reverse Position opens a review before a reversal is sent. It is on
by default, separate from Confirm New Orders. Turn it off to reverse a
position as soon as you click Reverse. The review still opens if a current
price is not available, or if you lead a copy trading group so you can see each
follower's result. This option is unavailable while Show Reverse Position is
off.
+ One-Click Trading
+ One-Click Trading shows a small window with Sell, Buy, and
+ Flat on the trade page. It is on by default. Buy and Sell send a market
+ order the moment you tap, with no review step, even if Confirm New Orders
+ asks you to review orders placed from the order ticket. Turn the switch off to
+ remove the window and its button.
+ One-Click orders are sent immediately. Fills can differ from the price shown
+ when the market moves fast. Challenge rules, exposure limits, and order
+ validation still apply.
+ The first time you use it, a notice explains how it works. Check **I understand
+ orders send without confirmation. and select Continue (or Turn On** if
+ you are turning the switch on in Settings). Your agreement is saved to your
+ account, so the notice does not appear again on other devices. Cancel sends
+ nothing.
+ Show Flat Button appears while One-Click Trading is on and is on by
+ default. Flat closes your whole position in that market and cancels the
+ market's open orders in one tap. Turn it off to hide Flat from the window.
+ One-Click Trading by Market lists the markets that have their own One-Click
+ settings. For each market you can change:
+
| Setting | Options |
|---|---|
| One-Click Size and Size Unit | USD, the asset, or Minis and Micros on supported index and commodity markets |
| One-Click Stop Loss / Take Profit | Leave empty for none, or enter an amount above 0 |
| Stop Loss and Take Profit Unit | Points, %, or USD |
+ Markets are added here when you change the size in the One-Click window. Other
+ markets start from your Quick Size amount and your
+ TP/SL Preset under Order Defaults. You can save One-Click settings for up to 50
+ markets. See One-Click Trading in
+ the Trading Guide for how the window works.
Trade Notifications
Choose whether the app shows notifications for market-order fills, resting
limit/stop fills, Take Profit fills, Stop Loss fills, order changes, and TP/SL
changes. These are visual notifications. Configure audio separately under
Notifications settings.
Fills that settle while your notification preferences are still loading are
announced as soon as loading finishes, even when newer fills have arrived in
the meantime. Notifications are a convenience, not an execution record: confirm
fill history on the trade page when precision matters.
For workflow examples, read the Trading Guide.
Trader Lockout
Use Trader Lockout in Trading settings to take a voluntary break. Choose