Show more above Trading Guide
Source: https://docs.myfundedperpetuals.com/guides/trading-guide
Understand simulated order execution, sizing, margin, leverage, Take Profit and Stop Loss, and the safeguards around each trade.
MyFundedPerps uses real market data and venue order books to simulate
orders and fills. The server validates account rules, available collateral,
market constraints, and execution protection before applying a fill to your
simulated account.
− Forex markets
− The forex markets are EUR/USD and USD/JPY, both on Hyperliquid. Both use
− the venue's perpetual order book and price history, with trading
− available around the clock subject to venue availability and fresh market data.
− There is no weekend price substitute or switch to another venue outside
− traditional forex hours. Check the order ticket for each market's current
− leverage and size requirements.
− Forex previously traded on Lighter. Open forex positions were carried over to
− the Hyperliquid markets with their entry price, size, leverage, and history
− unchanged, and they now follow the Hyperliquid market's prices and rules.
+ Forex and index markets
+ EUR/USD and USD/JPY trade on Hyperliquid, gold (XAU) on Binance, and the
+ S\&P 500 (SP500) and Nasdaq-100 (NAS100) on Hyperliquid, around the clock. The
+ following markets price from oracle venues that quote a bid and an ask, so
+ their order book shows a single level on each side:
+ Markets Venue GBP/USD, AUD/USD, USD/CAD, and USD/CHF Veranta Dow Jones 30 (US30) Ostium
+ US30 prices are index points. One unit of size is worth \$1 per
+ point, the same as every other market on the platform. Take Profit, Stop Loss,
+ and other price triggers on these markets follow the venue's mid price. Check
+ the order ticket for each market's current leverage and size requirements.
+ Trading hours
+ These markets follow their venue's trading sessions instead of trading around
+ the clock. Times are New York time:
+ Markets Weekly session Daily break GBP/USD, AUD/USD, USD/CAD, USD/CHF Sunday 17:00 to Friday 17:00 None US30 Sunday 18:00 to Friday 17:00 17:00 to 18:00, Monday to Thursday
+ Venues also close early or for the full day on some holidays. The trade page
+ shows a Market Closed notice whenever a market is outside its session.
+ While a market is closed
+ - Prices, the chart, and the order book show the last quote before the close.
+ - Market orders and position closes are rejected with a market closed
+ message. Nothing on the market can fill until it reopens.
+ - You can still place, edit, and cancel limit, Take Profit, and Stop Loss
+ orders. They stay open and can trigger or fill at the reopening price.
+ - Open positions keep counting toward your account at the last quote. If your
+ account is liquidated or closed out while a market is closed, those
+ positions close at that last quote.
+ Prices can open far from the last quote after a weekend or holiday. A Stop
+ Loss that the reopening price crosses fills at the first available price,
+ which can be worse than its trigger price.
Browse markets
The Markets page shows cached prices
Show more below and statistics so browsing does not wait for every data source. Prices refresh
every 30 seconds while the tab is visible; polling pauses in hidden tabs.
A recent listing and its other statistics are reused for ten minutes; an older
cached listing can appear while a replacement loads. Overview cards and
historical charts load independently from the market list.
Open Filters to narrow the list by asset class (Stocks, Crypto, Indices,
Commodities, FX) and other criteria. Selected filters stay in the page URL so
a refined view can be shared or refreshed.
Open a market to see current trading data. Orders use current execution checks,
not the cached prices on the Markets page.
Show more above changes at the same time, the app rejects the older change to protect the
newer saved version.
To change a drawing's settings, such as the levels, colors, and labels of a
Fibonacci retracement, right-click the drawing and choose Settings… at the
top of the menu, or double-click one of its lines. When the chart is tall
enough, the toolbar that appears after you select a drawing also shows a
settings icon.
Trade on a phone
On a phone, the trade page uses a single header row: the menu, the market
picker, the current mark price with its 24h change, and your notifications.
The page fills the screen, including the space Safari frees when you hide its
toolbar.
− - Tap the mark price to open Market Details. It shows mark price, 24h
− change, open interest, and 24h volume, and opens Trading Data,
− Market Info, and Market Depth. While one of those views is open, the
− tabs above it take you back to Chart.
+ - Tap the mark price, or the info icon beside the market name, to open
+ Market Details. When the market trades on more than one venue, the
+ Venue picker at the top switches between them. Below it are mark price,
+ 24h change, open interest, 24h volume, and any notes about the market, such
+ as its trading hours. It also opens Trading Data, Market Info, and
+ Market Depth. While one of those views is open, the tabs above it take
+ you back to Chart.
- The chart's drawing tools start collapsed. Tap the arrow at the chart's left
edge to show them.
Show more below - Tap Focus Chart (the full-screen icon in the header) to give the chart
the whole screen. The header and bottom tabs hide, leaving one bar under the
chart with your open position for the market, Buy / Long, **Sell /
Short, and Exit Focus**, which restores the full layout. Focus applies
only to the price chart and is remembered on that device.
Net PnL percentage
Position Net PnL % on the trading terminal, dashboard, and position PnL cards
is calculated as Net PnL ÷ position margin × 100 for every market,
including forex. For example, a \$25 net profit on \$250 of margin is a 10%
return.
Show more above For example, selling 0.5 BTC while you hold a 0.5 BTC long closes the long:
it does not leave you holding a 0.5 BTC long and a 0.5 BTC short. Selling
0.8 BTC instead closes the long and opens a 0.3 BTC short.
Hedge mode is not supported. You cannot hold a long and a short on the same
market in the same account at the same time.
When a position closes or flips, its Take Profit and Stop Loss orders are
canceled automatically, because the position they protected no longer
exists. Set new exits for a flipped position if you want them. When a
position is only reduced, any exit larger than the remaining size is reduced
to fit it.
Use Reduce Only (described below) when an order should only shrink or
close your position and never flip it.
+ Reverse a position
+ Reverse Position closes your position and opens the same size on the other
+ side. Holding a 1 BTC long and reversing leaves you with a 1 BTC short. On the
+ chart it is the up and down arrow on the position's line. In the Positions tab
+ it is the Reverse button in each row, and on a phone it is the **Reverse
+ Position** button on each position card.
+ A reversal is one market order for twice your position size, so both sides
+ happen in a single fill:
+ - All or nothing. If the new position would break a challenge rule, exceed
+ your margin or exposure limits, or exceed your
+ Max Market Slippage, the
+ order is rejected and your original position stays open unchanged. You are
+ never left flat by a reversal that only half worked.
+ - Same settings. The new position uses the leverage and margin mode of the
+ position you reversed.
+ - Fees and slippage. The trading fee applies to the full reversed size,
+ the same as closing and then opening separately. Market slippage is
+ estimated for the full order size.
+ - Exits. The position's Take Profit and Stop Loss orders are canceled, as
+ with any flip. Set new exits for the reversed position if you want them.
+ - Current position only. If the position changes before the order fills
+ (for example, a Take Profit partly closes it, you add to it, or you change
+ its leverage), the reversal is rejected instead of reversing something other
+ than what you saw. Try again with the updated position.
+ - Copy trading followers. Reversing a lead account reverses its followers.
+ If a follower's position changes before filling, its copy is resized to reach
+ the intended position on the new side. The follower still needs enough
+ available collateral and must pass its own trading checks. See
+ Copy Trading.
+ If Confirm New Orders reviews market orders, Reverse Position opens a short
+ review first. Otherwise it is sent as soon as you click it.
+ To remove the button everywhere, turn off
+ Show Reverse Position in Trading
+ settings.
Choose an order type
Order What it does Main tradeoff
Show more below Market Fills the full size using the execution model described below. Adverse slippage is capped by the market's published tier. Limit Rests at your price and fills in full there once the market reaches it. A limit placed through the market fills right away as a market order. Controls price but may remain unfilled if the market never reaches the limit. Stop / Take Profit Watches a trigger and submits the configured exit behavior when reached. A trigger is not a guaranteed fill price; execution still uses current market conditions. Scheduled or advanced order Breaks or manages an instruction using the controls shown in the order ticket. Each generated order still passes the ordinary account and execution checks.
Check the order ticket for the order types available on the selected market.
Select Reduce Only to cap an order at closing or shrinking an existing
position in the opposite direction. It is offered on every order type except
Take Market: a reduce-only take exit belongs on the position's Take Profit
instead. When an account restriction requires it, the option is locked on and
oversized requests are capped at the open position size.
Show more above wait longer between attempts. A brief touch still does not guarantee a fill.
Where faster confirmation is enabled, a fresh book showing the market
strictly beyond your resting limit can fill it immediately at the limit
price. If that book is too old, the order uses the usual confirmation checks.
Exact touches can start confirmation immediately after the order is
triggered, but still need a newer book that reaches the limit. If an
execution attempt is interrupted, the order can return to waiting and retry;
it does not fill using an old touch alone.
- A Limit take profit or stop loss follows the same rule after it triggers: it
rests at its price and fills in full at that price once the market reaches
it, so it can remain unfilled. If the market has already passed the limit
when it triggers, it fills right away as a market order instead.
+ Start a limit order from the chart
+ Hover the chart and a + button appears beside the price label on the price
+ scale. Click it to start a limit order at that price. A level above the current
+ price starts a sell limit and a level at or below it starts a buy limit. You
+ can switch the side in the order ticket.
+ The order ticket switches to Limit with the price filled in, and the chart
+ draws a dashed draft line at that level. The draft is not placed yet: drag the
+ line to adjust the price, set the size in the order ticket, then submit the
+ order there.
+ You can also right-click the chart and choose Buy Limit at or **Sell Limit
+ at** the price under the pointer.
How market orders fill
Market orders, including triggered stop and take-profit market exits, fill
Show more below their whole size at the best ask for buys or the best bid for sells, with
maximum adverse slippage capped against the current mark reference. Each
published tier is a worst-case bound, not a fixed fill offset. If the book
offers a price inside the cap, your order receives that price. A fill is never
better than the mark itself: buys fill at or above the mark and sells at or
below it, even when the book momentarily sits through the mark.
For buys, the fill is the lower of the best ask and mark × (1 + tier / 10,000),
and at least the mark. For sells, it is the higher of the best bid and
mark × (1 - tier / 10,000), and at most the mark. For example, with a mark of
\$100 and a 1 bps cap, a best ask of \$100.005 fills at \$100.005; a best ask of
Show more above at the trigger price: market movement and the spread can change the final loss.
Take Profit and Stop Loss instructions help define exits before an order is
submitted. You can show their estimated gain or loss in percent or USD, and
save a TP/SL preset that fills the same gain and loss on every market (see
Trading settings). Review
the trigger, direction, quantity, and whether the exit uses market or limit
behavior where the ticket offers that choice.
For a new order, you can enter either a trigger price or an estimated gain or
loss. The last field you edit controls the target. If you enter a USD amount or
percentage, the draft trigger price updates with the estimated entry price,
size, leverage, and fees until you submit. If you enter or drag the trigger
price, that price stays fixed and the gain or loss estimate updates instead.
− Once submitted, the order uses its saved trigger price. The selected amount is
+ If you switch between Long and Short, a fixed Take Profit or Stop Loss price
+ moves to the other side of the entry price at the same distance, so it still
+ protects the new direction. Once submitted, the order uses its saved trigger
+ price.
+ While you draft a limit order, the draft limit line on the chart shows TP
+ and SL handles. Drag a handle up or down to set that Take Profit or Stop
+ Loss price. The ticket turns on TP/SL and fills in the price, and the draft
+ line stays in sync with the ticket as you edit either one. Nothing is placed
+ until you submit the order. A handle is hidden once its level is set, and the
+ SL handle is hidden while a trailing stop is selected. The selected amount is
an estimate, not a guaranteed final profit or loss.
New Take Profit, Stop Loss, and other conditional orders use the market's
Show more below standard chart source:
Venue Trigger source Binance, Bybit, Hyperliquid (including forex) Last traded price
For Last Price triggers, one actual trade touching your level is enough,
including a small trade. The platform does not wait for the candle to close
or for the mark price to reach the same level. Liquidation and account loss
monitoring use their separate price references.
Protective market Stop Loss and Take Profit orders can execute using the
first recorded best bid or ask at or after the touch when eligible quote evidence
is available and the order and position have not changed. That price stays fixed
Show more above - Reset to Default: restore the platform default arrangement and panel
sizes in one click.
Choose Edit Current Layout to enter edit mode. The edit toolbar takes the
place of the market stats bar while you edit, so the terminal stays where it
is. In edit mode, drag any panel by its handle onto a highlighted zone: an
existing column, or a strip at the edge where a new column will appear.
Hovering a zone outlines where the panel will land and names the zone. You
can also use the panel's Move To menu. Each panel header also has a hide
button. Panels glide into their new places, and rearranging never reloads the
main chart. The edit toolbar keeps the arrangement with Done, restores
the layout you selected before editing with Reset, or names the
arrangement with Save as Layout.
+ Multiple charts
+ On a desktop-width window, the chart layout buttons beside Terminal Layout
+ in the market stats bar, or the Chart Layout section of the **Terminal
+ Layout menu, split the chart area into One Chart, Two Charts** side by
+ side, or Four Charts in a grid. Every chart is a full
+ chart with your indicators, drawing tools, saved chart layouts, and position
+ and order lines for the market it shows.
+ - The first chart always shows the market in the address bar. Picking a
+ different market in its header opens that market's trade page.
+ - Each other chart has its own market picker in its header and keeps its own
+ timeframe, so you can watch different markets, or the same market on
+ different timeframes. Changing its market or timeframe does not retarget the
+ other charts. A chart the layout shows for the first time starts on the market in the address
+ bar, on the 1h, 4h, or daily timeframe.
+ - Saved chart customizations are shared across charts. Charts showing the same
+ market also share saved drawings. If you edit drawings in both, the latest
+ save is kept.
+ - Click a chart to trade its market. The active chart gets a highlighted
+ border, and the order ticket and order book switch to its market. When that
+ market differs from the address bar, both show a "Following chart" strip
+ with the market name, and the buy and sell buttons name the market, so you
+ can confirm it before you submit. Click the first chart, or open a different
+ market, to return the ticket to the market in the address bar.
+ - Starting a limit order from the chart's context menu works in the first
+ chart only.
+ Choose One Chart at any time to return to the single chart. The layout and
+ each chart's market and timeframe are remembered per browser. Charts you are
+ not showing are closed and do not load market data. Phone and narrow-window
+ layouts always show one chart.
Widgets
The Widgets row in the edit toolbar lists every panel that is not on
Show more below screen; scroll it sideways when it holds more widgets than fit. Drag a widget
chip onto a highlighted zone, or open its Place in menu and pick a zone,
and it joins the terminal there. Hiding a placed widget returns it to the
row. Widgets you can place:
- Market Chart: a compact chart with its own market picker and timeframe
chips, so you can watch one market while trading another. While it is
placed, the bottom-bar Chart button shows "Docked in the terminal"
instead of opening a floating window; the widget and the floating window
share the same market and timeframe. Click the docked chart to trade its
market: the order ticket and order book switch to it, both show a
Show more above Hiding the order ticket removes the order entry form until you show it again
from customize mode or apply another arrangement.
Automatic closure after an evaluation pass
When the server confirms that your evaluation equity reaches its profit
target and the other pass requirements are clear, the account automatically
passes and closes its open positions. Open profit and loss count toward
equity, so you do not need to close trades yourself to realize the target.
Closing fees or slippage can leave the final balance slightly below target
without changing the passed result. See
Evaluation Progress.
Understand rejections
An order can be rejected when it would violate account rules, collateral or
− position limits, current market availability, execution protection, a pending
− payout lock, or copy-follower restrictions. Read the message attached to the
+ position limits, current market availability or
+ trading hours, execution protection, a pending payout lock,
+ or copy-follower restrictions. Read the message attached to the
rejected order, confirm the active account, then change only the condition that
caused the rejection.
Show more Do not repeatedly resubmit an unchanged order. If the reason remains unclear,
use Troubleshooting and FAQ.
Today's fill statistics
The dashboard counts fills on the day they settle, even if you placed the order
on an earlier day. Today's fees, realized PnL, traded volume, and fill win rate
use the same fills. The day runs from midnight to midnight in America/New_York,
including daylight saving changes. Unfilled orders and historical fills with no
recorded settlement time are excluded from these daily statistics.
Today's P\&L
Today's P\&L measures the change in equity since midnight in America/New_York.
It includes changes in unrealized profit or loss, trading fees, and swap fees,
− so it can differ from the profit on trades closed today.
+ so it can differ from the profit on trades closed today. The swap fee charged
+ at midnight belongs to the day that just ended, so it is not part of today's
+ P\&L.
If you closed all positions before today's reset and have had no activity
since, today's P\&L is \$0.00. Yesterday's gain or loss is already included in
Show more below your balance. A page left open checks the current day once per minute without
requiring a refresh. If you have open positions and today's starting equity
is not yet available, the daily P\&L value and its share action remain
unavailable until that value arrives.